Hook Reference › Partridge Hooks › Partridge GRS12ST — Grey Shadow Hooks

Partridge of Redditch GRS12ST

Grey Shadow Emerger/Nymph Hooks

Marks: P photographically · V verified · I inferred · E estimated · S speculative What they mean

Photographic record

6 photographs

Side view of a dark grey fly hook on grid paper, with an in-line closed ring eye, an arched shank, a deep rounded bend and a small barb.
IMG-2Partridge — New entry — image 2 Hook photographed for the size 6 specimen, side view. The grid squares carry no printed units.

Identify

The Partridge GRS12ST is the Grey Shadow Emerger/Nymph hook from Partridge of Redditch. The packaging describes it for curved body nymph and emerger patterns V. The maker’s label bases the range on its K12ST long shank Sedge/Caddis hook V.

The record rests on a size 6 packet and a size 16 packet.

How to identify it

Two packaging designs are recorded, one on a size 16 packet and one on a size 6 packet. The size 16 design has grey outlined PARTRIDGE lettering, prints EMERGER/NYMPH above GREY SHADOW HOOKS, and carries the Redditch address and a specification text on the back P.

The size 6 design has green outlined lettering, prints GREY SHADOW above EMERGER / NYMPH, and carries a short company text, MADE IN CHINA and a barcode on the back P. The size 6 back gives no specification text P.

Both designs print the model code GRS12ST on the front.

Measurements & specifications

Features of the model, as recorded
FeatureRecordedEvidence
EyeBall Eye, Straight / Inline
Show noteHide note

Closed ring eye in line with the shank. The outer end is rounded and slightly flattened, with a small step where it meets the shank P.

OBS-1OBS-8
WireExtra-Fine, ForgedCMP-3LBL-6SRC-3CMP-3 compared with 79 catalogued hooks classified Extra-Fine
ShankStandard — Curved / humpedCMP-1LBL-6SRC-3OBS-5OBS-12OBS-2OBS-9CMP-1 compared with 212 catalogued hooks classified Standard
BendSproat, Standard gap
Show noteHide note

The shank arches gently and sweeps into a deep rounded bend. The wire has flat faces along the bend P.

OBS-2OBS-9
PointStandard / Spear
Show noteHide note

One small, short barb is cut on the upper edge of the point, set back from the tip P.

OBS-4OBS-11
Finishstated on packaging
Show noteHide note

Dark grey with a satin sheen and bright reflections along the wire P. The size 16 hook has a mottled, slightly granular texture over the bend and rear shank P.

OBS-6OBS-13

The size 16 packet back states the specification as standard weight wire, 3 x long, forged bend and curved shank V. The photographed hooks show no kinks, ridging or markings on the shank P.

The same text says all Grey Shadow hooks are Flashpointed and protected with the Niflor finish V. A hobbyist hook list describes Niflor as a hard nickel-phosphorus finish that contains PTFE, and flashpointing as chemical sharpening of the point V.

Measurements

Per size, with how each dimension was taken
SizeOverall lengthShank lengthGap widthBend depthWire diameterWeight
6Specimen S226.4 mm EcaliperMEA-119.1 mm EcaliperMEA-28.6 mm EcaliperMEA-3—0.8 mm EcaliperMEA-4—
16Specimen S1——————
Calibrated SVG True-scale preview

How the measurements are defined
How hook dimensions are measuredA hook outline with dimension lines for overall length, shank length, gap, bend depth, and wire diameter.Overall lengthShank lengthGapBend depthWire diameter
Overall length
Eye to the farthest point of the bend.
Shank length
Eye to the start of the bend.
Gap
Point to shank, at right angles to the shank.
Bend depth
Shank to the bottom of the bend.
Wire diameter
Across the wire, measured by caliper where possible.

Use & alternatives

  • Nymph

Primary application

The packaging calls the hooks Emerger/Nymph. The back text of the size 16 packet gives the uses as curved body nymph and emerger patterns V.

Other uses

A dealer's listing adds sea trout flies in the larger sizes, such as 6 and 8 V.

Label & packaging

This record documents 2 specimens. Each describes itself only; none stands for every example of the model.

S1 · Packet of size 16, grey logotype

Size
16 (printed on the label)
Container
Packet
Hook condition
No rust or flaking visible. The mottled surface could be finish texture or wear; the photograph does not separate the two (P).
Packaging condition
Very Good — light wear, fully legible
Measured
size 16
Photographs
IMG-1IMG-3IMG-5

The size is printed on the front insert and written on the header label. The hook photograph and the back photograph are assigned to this packet by filename. An orange fluorescent dot sticker covers part of the bird figure, and a yellow tape strip runs across the lower back of the bag.

Full label transcription
LBL-1 trademark · front insert, top logotype from IMG-1
PARTRIDGE
OF REDDITCH
LBL-2 printed · front insert, product window from IMG-1
EMERGER/NYMPH
GREY SHADOW HOOKS
LBL-3 printed · front insert, size window from IMG-1
SIZE 16
LBL-4 printed · front insert, lower right from IMG-1
QTY 25
REF GRS12ST
LBL-5 printed · back header card from IMG-5
PARTRIDGE OF REDDITCH LTD
MOUNT PLEASANT REDDITCH WORCESTERSHIRE B97 4[?]E ENGLAND
TEL: +44 (0) 1527 543 555 / 541 380 FAX: +44 (0) 1527 546 956
email: hooks@partridge-of-redditch.com http://www.partridge-of-redditch.co.uk
LBL-6 printed · back insert card, text block from IMG-5
Partridge of Redditch, makers by hand of the finest British fly hooks
since the start of the century - World renown for their quality.

All Partridge Grey Shadow hooks are "Flashpointed" and protected with the
special "Niflor" finish.

This range - GRS12ST - are based on our very popular K12ST long shank
Sedge/Caddis hooks but have the grey shadow finish.

USES:- Ideal for curved body nymph and emerger patterns.

SPECIFICATION:- Standard weight wire; 3 x long; forged bend and curved
shank.
LBL-15 handwritten · header card, upper right, white paper label from IMG-1
GRS12ST
#16
Trademark
White line-art bird figure at lower left of the header card, partly covered by an orange dot sticker. PARTRIDGE logotype in grey outlined capitals on a black insert.
As entered on the specimen record
PARTRIDGE
OF REDDITCH
EMERGER/NYMPH
GREY SHADOW HOOKS
SIZE 16
QTY 25
REF GRS12ST

PARTRIDGE OF REDDITCH LTD
MOUNT PLEASANT REDDITCH WORCESTERSHIRE B97 4[?]E ENGLAND
TEL: +44 (0) 1527 543 555 / 541 380 FAX: +44 (0) 1527 546 956
email: hooks@partridge-of-redditch.com http://www.partridge-of-redditch.co.uk

Partridge of Redditch, makers by hand of the finest British fly hooks
since the start of the century - World renown for their quality.

All Partridge Grey Shadow hooks are "Flashpointed" and protected with the
special "Niflor" finish.

This range - GRS12ST - are based on our very popular K12ST long shank
Sedge/Caddis hooks but have the grey shadow finish.

USES:- Ideal for curved body nymph and emerger patterns.

SPECIFICATION:- Standard weight wire; 3 x long; forged bend and curved
shank.
Layout
Front insert, top to bottom: PARTRIDGE logotype with OF REDDITCH, product window, size window, then QTY and REF lines at lower right. The back header card carries the company address and contact lines; the back insert carries the text block. Lettering in the front windows is clipped at the window edges, and the final S of HOOKS is cut by the right edge of its window.
Later marks
White paper label on the header card, upper right, in ink: GRS12ST / #16.

S2 · Packet of size 6, green logotype

Size
6 (printed on the label)
Container
Packet
Hook condition
No rust, pitting or flaking visible on the photographed hook. A few tiny faint marks on the outer bend, left side, are too small to identify (P).
Packaging condition
Very Good — light wear, fully legible
Measured
size 6
Photographs
IMG-2IMG-4IMG-6

The size is printed on the front insert and written on the header label. The hook photograph and the back photograph are assigned to this packet by filename. An orange fluorescent dot sticker covers part of the bird figure, and a clear tape band and a small brown-gold tape tab sit on the lower back.

Full label transcription
LBL-7 trademark · front insert, top logotype from IMG-6
PARTRIDGE
OF REDDITCH
LBL-8 printed · front insert, product window from IMG-6
GREY SHADOW
EMERGER / NYMPH
LBL-9 printed · front insert, size window from IMG-6
SIZE  6
LBL-10 printed · front insert, lower right, partly behind hooks from IMG-6
QTY  25
[?]EF GRS12ST
LBL-11 printed · back header card from IMG-4
PARTRIDGE OF REDDITCH LTD
email: hooks@partridge-of-redditch.com  http://www.partridge-of-redditch.co.uk
LBL-12 printed · back insert card, upper text from IMG-4
Partridge of Redditch, makers by hand of the finest fly hooks
since the start of the century- World renown for their quality.
LBL-13 printed · back insert card, lower area above barcode from IMG-4
MADE IN CHINA
LBL-14 printed · back insert card, bottom, barcode digits from IMG-4
0 23534 34341 2
LBL-16 handwritten · header card, upper right, white paper label from IMG-6
[?]RS12ST
#6
Trademark
White line-art bird figure at lower left of the header card, partly covered by an orange dot sticker. PARTRIDGE logotype in green outlined capitals on a black insert with a green border strip above it.
As entered on the specimen record
PARTRIDGE
OF REDDITCH
GREY SHADOW
EMERGER / NYMPH
SIZE  6
QTY  25
[?]EF GRS12ST

PARTRIDGE OF REDDITCH LTD
email: hooks@partridge-of-redditch.com  http://www.partridge-of-redditch.co.uk

Partridge of Redditch, makers by hand of the finest fly hooks
since the start of the century- World renown for their quality.

MADE IN CHINA

0 23534 34341 2
Layout
Front insert, top to bottom: PARTRIDGE logotype with OF REDDITCH, product window, size window, then QTY and REF lines at lower right, partly behind the hooks. The first character of REF is hidden by hook wire. The back header card carries the company name and contact lines; the back insert carries a short text block, MADE IN CHINA and the barcode with its digits below.
Printed marks
Barcode on the lower back insert.
Later marks
White paper label on the header card, upper right, in ink: [?]RS12ST / #6. The first character is unclear.

History & dating

Series

A hobbyist hook list that refers to February 1999 names GRS 12ST as Grey Shadow Emerger/Nymph Hooks in sizes 8 to 18 V. A January 2008 forum post lists GRS12ST among Partridge items placed on hold while production of key items caught up V.

The maker’s trout hook page does not list GRS12ST V.

Design lineage

The back label of the size 16 packet states that the GRS12ST range is based on the maker’s K12ST long shank Sedge/Caddis hook and differs by its grey shadow finish V. The maker’s trout hook page lists K12ST as standard wire with a long shank and a forged sweeping bend V.

Partridge of Redditch — A January 2008 forum post by a poster who appears to speak for Mustad says Partridge hook production had moved from Redditch to Singapore and then to a new factory at Wuxi, China V. It does not say where GRS12ST was made. Read the maker’s history →

Value & buying

2 / 10CollectabilityRarity: Common

Rated 2, common. A dealer lists the model in sizes 6 to 16 and each recorded packet holds 25 hooks, but no source documents scarcity, sales or collector demand.

Basis: A dealer lists sizes 6 to 16 V. Packets hold 25 hooks P. No scarcity source, count of surviving examples or sales are recorded.

Packets of 25 hooks suggest the model was made in quantity I. No source in the record gives a discontinuation date, a count of surviving packets, or a date for either packaging design.

No sold results are recorded for this model, so no value range is shown.

Where to find

A dealer, adh-fishing.com, lists the model in sizes 6 to 16 V.

Sources & research

Sources & documentation

This specimen and its packaging — photographed, 6 images
Supports: Hook nameHook type applicationQuantity per packageSize documentedEyeBend
+21 morefewerBarbFinishWireShankOverall lengthShank lengthGap widthWire diameter measuredMeasurements availableMeasurement notesCollectability ratingRarityCollectability summaryRarity basisPackagingSummaryTechnical notesDesign lineagePrimary applicationCollectability detailIdentification

Entry updated October 29, 2026.