Selected size4/0
Catalog record
- Overall Length
- 53.2 mm
- Gap Width
- 18.2 mm
- Wire Diameter
- 1.45 mm
Published Spec
Ahrex
Manufacturer
6-4/0
Sizes
Streamer
Application
Mfr. data
Source
Catalog attributes
Eye
Eye OrientationJig
Wire & Shank
Wire GaugeStandard
Shank LengthUnknown
Bend & Gap
GapStandard
Point & Finish
Point StyleStandard Spear
FinishBlack nickel
WireSingle
Size & scale lab
Physical specimen
Catalog record
Selected size2/0
Catalog record
- Overall Length
- 48.3 mm
- Gap Width
- 16.5 mm
- Wire Diameter
- 1.25 mm
Published Spec
Selected size1/0
Catalog record
- Overall Length
- 44 mm
- Gap Width
- 15 mm
- Wire Diameter
- 1.2 mm
Published Spec
Selected size1
Catalog record
- Overall Length
- 39.4 mm
- Gap Width
- 13.7 mm
- Wire Diameter
- 1.1 mm
Published Spec
Selected size2
Catalog record
- Overall Length
- 34.2 mm
- Gap Width
- 11.7 mm
- Wire Diameter
- 0.95 mm
Published Spec
Selected size4
Catalog record
- Overall Length
- 29.9 mm
- Gap Width
- 10.2 mm
- Wire Diameter
- 0.9 mm
Published Spec
Selected size6
Catalog record
- Overall Length
- 27 mm
- Gap Width
- 9.2 mm
- Wire Diameter
- 0.85 mm
Published Spec
U.S. customary (inches) with metric equivalent. Published Spec = sourced from manufacturer published data.
Related by attribute
Computed automatically from catalog data and updated as new hooks are added.
| Silhouette | Hook model | Match | Analysis | Compare |
|---|---|---|---|---|
|
2370 No. true — Daiichi 2370 | 78% | Compare | |
|
9674 No. 4 (P) — Mustad 9674 Viking Streamer Hook | 76% | Compare | |
|
184 No. t specified on packaging — 184 Superfine | 70% | Compare | |
|
667 No. 2 — Chestertown 667 | 69% | Compare | |
|
993DH No. true — Custom's Hump Long Shank | 68% | Compare |
Notes
Imported from the published Ahrex spec sheet for PR360. Hook length; gap and wire diameter are manufacturer-published and carried on the size rows as published_spec. eye_type; eye_orientation and bend_family are left unset unless the model name or sheet states them - not inferred. shank_length_category set only where the model name states it.
Industry cross-reference
Industry cross-reference
60-degree jig hook
60° angled eye jig for euro nymphing
| Ahrex | PR378Spec record |
|---|---|
| Daiichi | 1140*Spec record 4640Spec record 4698Chart only |
| Firehole | 516Chart only 551Chart only |
| gamakatsu | J20Chart only J20-BChart only |
| Hanák | H400BLChart only H450BLChart only H45XHChart only |
| Partridge | 602Chart only 604Chart only |
| Tiemco | 403BLJChart only |
* Barbless variant. Green entries are full catalog records; amber entries are spec records. Gray entries are chart-only and not physically verified.
Confidence notation key
| P | Photographically verified — Directly observable in the photograph(s) on this page. |
| V | Verified by documentation — Confirmed by manufacturer catalog, spec sheet, or published reference. |
| I | Inferred — A logical deduction from observable or documented evidence, not directly stated. |
| E | Estimated — An approximation based on visual comparison, proportional analysis, or limited data. |
| S | Speculative — A reasoned hypothesis that cannot be confirmed from available evidence. |
Claims with no notation are confirmed by multiple independent sources. All photographs on garrenwood.com are taken on a measurement grid where each square equals 1/10 inch (0.1″ / 2.54 mm).