O. Mustad & Son 92661

Beak Baitholder Hook - 1X Long

Marks: P photographically · V verified · I inferred · E estimated · S speculative What they mean

Photographic record

2 photographs

Mustad 92661 clear hanging clamshell labeled size 6, quantity 50, with blue Mustad sleeve and orange Strike-Zone Fishing $4.00 price sticker.
IMG-1Mustad — New entry — image 1 Mustad 92661 package marked REF 92661, SIZE 6 and QTY 50. The orange Strike-Zone Fishing sticker carries a handwritten $4.00 retail marking (P).

Identify

The Mustad 92661 is a beak baitholder hook with a manufacturer-designated 1X-long shank V. Its two raised bait-retaining slices help distinguish the design, and the photographed specimen shows a single barbed point P.

How to identify it

Look for REF 92661 on the package label. The photographed hanging clamshell also identifies size 6 and a stated quantity of 50 P. On a loose hook, look for two separate, raised bait-retaining slices along the shank, a ringed eye and an inward-curving, barbed point P.

Mustad describes the 92661 as a reversed-point beak baitholder with a 1X-long shank V. A similar loose hook should not be assigned this model or nominal size solely from its outline I.

Working hypothesis Identification · Specimen S1

The photographed loose hook is a plausible physical example of the documented Mustad 92661 design. Its two raised shank slices and inward-curving beak point support the assignment, but they do not independently prove the model number or nominal size.

How we got there

Basis: OBS-2 through OBS-5 document the hook's visible geometry. SRC-1 establishes the manufacturer's corresponding model description. IMG-1 and LBL-2 identify the separately photographed package.

Reasoning: The combination of a broad curved bend, barbed inward-curving point and two raised shank slices agrees with the manufacturer's documented baitholder configuration.

Measurements & specifications

Features of the model, as recorded
FeatureRecordedEvidence
EyeBall Eye, Turned Down
WireStandard, Forged
Shank1X Long — Baitholder slicesSRC-1OBS-5
BendBeak / Reversed Point, Wide gap, Offset / kirbed
PointBeak / Reversed
FinishBronzed — judged from the photographs
Show noteHide note

The photographed hook has glossy yellow-gold to bronze-colored reflections P. Bronze is one of several finishes listed for model 92661 V; this specimen's exact finish is not established.

OBS-6SRC-3IMG-1

Mustad specifies the 92661 as a forged, 1X-long beak baitholder with a ringed eye, reversed point and two bait-retaining shank slices V. The manufacturer’s term reversed means the point is offset to the right when viewed from the eye down the shank. That lateral offset cannot be independently confirmed from the supplied side photograph P.

The pictured hook has a broadly rounded bend and an inward-curving point P. The manufacturer’s 1X Long designation identifies its shank-length grade; it does not establish an undocumented historical wire-strength grade.

Measurements

Overall length39.6 mm EcaliperMEA-1
Shank length28.4 mm EcaliperMEA-2
Gap width13.6 mm EcaliperMEA-3
Wire diameter1.8 mm EcaliperMEA-4

Size 6, specimen S1. Bend depth, weight and the shank-to-gap ratio are in the full table.

All recorded values
Per size, with how each dimension was taken
SizeOverall lengthShank lengthGap widthBend depthWire diameterWeight
6Specimen S139.6 mm EcaliperMEA-128.4 mm EcaliperMEA-213.6 mm EcaliperMEA-3—1.8 mm EcaliperMEA-4—
Calibrated SVG True-scale preview

How the measurements are defined
How hook dimensions are measuredA hook outline with dimension lines for overall length, shank length, gap, bend depth, and wire diameter.Overall lengthShank lengthGapBend depthWire diameter
Overall length
Eye to the farthest point of the bend.
Shank length
Eye to the start of the bend.
Gap
Point to shank, at right angles to the shank.
Bend depth
Shank to the bottom of the bend.
Wire diameter
Across the wire, measured by caliper where possible.
Catalog records. One individual loose hook is photographed, together with a separate Mustad 92661 size-6 package. The package's stated quantity is 50; the surviving contents have not been counted. The loose hook's membership in that package remains unverified.

Inferred Design · Model

The 92661 combines separate bait-retaining shank slices with a beak-shaped, reversed point. The design appears to address both bait position along the shank and the orientation of the point, rather than relying on one feature for both functions.

How we got there

Basis: SRC-1 specifies the reversed beak point and the two shank slices. OBS-2 through OBS-5 document the curved bend, point and raised slices on the photographed hook.

Reasoning: The shank slices are positioned along the straight portion of the hook, where they can engage bait, while the curved point and specified lateral offset affect the geometry of the terminal hooking section.

Use & alternatives

  • Bait fishing

Primary application

The 92661 is a bait-fishing hook V. Its two raised shank slices are intended to help retain bait on the hook V, while the inward-curving beak point and reversed configuration are part of Mustad’s documented design V.

Inferred Application · Model

The pair of raised shank slices makes the 92661 particularly suited to bait presentations in which material might otherwise slide along a plain shank. The same protrusions may make the shank less convenient for conventional fly-dressing work.

How we got there

Basis: SRC-1 establishes bait-fishing use and the two bait-retaining shank slices. OBS-4 and OBS-5 show their position on the photographed hook.

Reasoning: Raised, backward-facing slices can mechanically resist material moving toward the bend. That property is useful for bait retention but can interfere with materials that need to be wound smoothly around a fly-tying shank.

Modern equivalents

Inferred Comparison · Specimen S1

The recorded gap and wire diameter for S1 should not yet be used as representative dimensions for a Mustad 92661 size 6. Both are substantially larger than the values in Mustad's published size-6 chart, suggesting a measurement, endpoint, specimen-association or production-generation discrepancy.

How we got there

Basis: MEA-3 records a gap of approximately 13.6 mm, and MEA-4 records wire diameter of approximately 1.8 mm. SRC-2 gives manufacturer specifications of 9 mm and 0.88 mm for size 6.

Reasoning: The differences are too large to treat as ordinary rounding. They may reflect how the measurements were taken, what part of the hook was measured, the identity of the measured specimen or genuine differences between production examples.

Label & packaging

This record documents one specimen. It describes that specimen only, not every example of the model.

S1 · Loose baitholder hook — recorded size 6

Size
6 (from the existing record)
Container
Loose (no packaging)
Hook condition
Hook appears complete, with an intact ring eye, main point, main barb and two raised shank slices. Fine surface lines and localized abrasion or manufacturing texture are visible around the bend. No extensive corrosion or obvious fracture is visible (P).
Packaging condition
Good — moderate wear, legible
Measured
size 6
Photographs
IMG-2
Detailed condition observations
Wear
cardboard sleeve, left edge, right edge and top blue border: Noticeable edge abrasion, fraying, surface scratches, creases and losses of printed color. White specification panel is discolored and marked. LBL-5
Wear
transparent plastic container and hanging tab: Surface scratching, scattered small marks, cloudiness and handling wear. No definite structural break is visible in the photographed front view. LBL-6
Wear
orange retail sticker: Light surface abrasion, scratches and dark marks. Sticker remains largely intact and its printed retailer name is legible. LBL-7

S1 is the single loose hook photographed in attachment 25483. It has no visible model or size inscription. The size-6 designation is carried from the stored record; association with package V1 is provisional. V1 is shown separately in attachment 25482, where several hooks are partially visible but cannot be individually assigned to S1.

Full label transcription
LBL-1 trademark · front sleeve, upper blue panel from IMG-1
Mustad®
LBL-2 printed · front sleeve, lower white specification panel from IMG-1
REF       SIZE       QTY
92661     6          50
LBL-3 trademark · orange retail sticker, lower front from IMG-1
STRIKE-ZONE FISHING
LBL-4 handwritten · orange retail sticker, lower portion from IMG-1
$4.00 in thick black marker. The amount is a visible price marking, not evidence of a completed sale.
Trademark
White Mustad wordmark with registered-trademark symbol and two sweeping yellow-orange bands below it. Separate orange Strike-Zone Fishing sticker with a stylized dotted fish graphic P.
As entered on the specimen record
Mustad®
REF       SIZE       QTY
92661     6          50
STRIKE-ZONE FISHING
Layout
Transcription belongs to separately photographed packaging variant V1, not to markings on the loose hook. The Mustad wordmark appears above a white specification panel with three labeled columns. A separate orange retailer sticker overlaps the lower front. The loose hook's original association with V1 has not been confirmed.
Typeface
Large white sans-serif Mustad wordmark on blue; bold black condensed-looking specification lettering on white; bold black retailer lettering on orange P.
Printed marks
V1 printed identification: REF 92661; SIZE 6; QTY 50. Separate retailer identification: STRIKE-ZONE FISHING P.
Later marks
The separate V1 retailer sticker has a handwritten $4.00 marking in black. This is not a recorded completed sale P.

Care of this specimen: Keep the original labeled packaging and retailer sticker intact. Record the hook's provenance and take calibrated caliper photographs before relying on the stored dimensional measurements.

Inferred Packaging · Packaging

The Strike-Zone Fishing sticker appears to be a retailer-applied addition to the Mustad packaging. Its handwritten $4.00 price likely records an offered shelf price rather than a manufacturer-set model price.

How we got there

Basis: LBL-1 and LBL-2 document the printed Mustad sleeve. LBL-3 identifies the separate orange retailer sticker, and LBL-4 records its handwritten price marking. IMG-1 shows the sticker overlapping the manufacturer's packaging.

Reasoning: The separate adhesive label uses a different design and carries a retailer name and manually marked amount. This is consistent with shop-level pricing applied after manufacture of the branded package.

History & dating

Inferred Period · Packaging

Packaging

The photographed clear hanging clamshell appears to represent a retail-packaging phase of Mustad 92661 rather than an original introduction document. Its design may help date the package if matched to a dated catalog or advertisement.

How we got there

Basis: IMG-1 shows a molded transparent hanging clamshell with printed sleeve, registration symbol and sweeping yellow-orange graphics. LBL-1 and LBL-2 document the visible manufacturer labeling.

Reasoning: The molded hanging construction, standardized product identification and printed retail presentation are consistent with commercial display packaging. They establish a format that may be compared against dated packaging examples.

Value & buying

This record does not establish the model's scarcity or level of collector demand. The photographed package preserves useful model, size and original quantity information P, but neither its age nor its completeness has been established.

For an example retaining its original package, inspect the printed model and size information, the condition of the cardboard sleeve, the integrity of the plastic container and the number of hooks actually present. The photographed package is marked QTY 50, but that does not establish how many hooks remain inside P.

For loose examples, examine the eye, main point, barb and two shank slices. The photographed hook appears complete, without an obvious broken point or extensive corrosion P. Its precise size and relationship to the separate package still require confirmation.

Inferred Collector interest · Packaging

The package has reference value beyond the loose hook because it preserves the model number, nominal size, stated quantity, branding and a separate retail price marking in one photographed example. These details could support future packaging chronology and retail-distribution comparisons.

How we got there

Basis: LBL-1 through LBL-4 establish manufacturer branding, REF/SIZE/QTY information, retailer identification and handwritten price. IMG-1 documents their arrangement.

Reasoning: A surviving labeled package connects a hook design to a specific commercial presentation. Later comparison with dated examples could establish changes in graphic design, package quantities or retailer labeling.

Sources & research

Sources & documentation

This specimen and its packaging — photographed, 2 images
Supports: ShankFinishSize documentedQuantity per packagePackaging format codePackaging
+13 morefewerIs snelledMeasurements availableOverall lengthShank lengthGap widthWire diameter measuredCumulative records noteSummaryIdentificationTechnical notesPrimary applicationCollectability summaryCollectability detail

Open questions

  1. When was Mustad's blue-and-white 92661 hanging clamshell with yellow-orange sweeping bands distributed?The photographed front establishes the packaging design but provides no manufacturing or distribution date. The available source findings do not date this exact package format.Can you help? Share a dated Mustad catalog, price list, advertisement or original packaging photograph showing this exact design, including its publication or documented purchase date.

Entry updated November 14, 2026.