Hook Reference › S. Allcock & Co’s Hooks › Allcock 6812 — Best Hollow Point

S. Allcock & Co. 6812

Best Hollow Point

Marks: P photographically · V verified · I inferred · E estimated · S speculative What they mean

Photographic record

3 photographs

S. Allcock & Co. Best Hollow Point 6812 — sales card front face — size 1 — letterpress printed cream cardboard, 1940s-1950s era
IMG-1Allcock Best Hollow Point 6812 Sales Card Front Top panel of the Allcock 6812 T.D.E. Best Hollow Point cardboard slide box showing the standing stag trademark, model number, and Slightly Reverse label.

Identify

The Allcock 6812 T.D.E. Best Hollow Point is a single-ply hook manufactured by S. Allcock & Co., Ltd. of Redditch, England P. The photographed size 1 specimen combines a tapered turned-down eye, a rounded Sproat bend, a concave hollow point with a short cut barb, and a bronzed finish P.

Its original cardboard slide box carries Allcock’s standing stag trademark and prints “6812 T.D.E.”, “BEST HOLLOW POI[?][?]”, “Slightly Reverse”, and “100 Hooks.” on a cream paper wrapper P. Because recorded physical measurements (13.72 mm overall length) and the 0.1-inch grid photograph (~39.2 mm) show a scale discrepancy under review, physical dimensions remain flagged for verification.

How to identify it

Look for Allcock’s left-facing standing stag trademark with “TRADE MARK.” in the upper left of the cream paper wrapper, framed by a single black border line P. Printed text reads “6812 T.D.E.”, “BEST HOLLOW POI[?][?]” (clipped at the right fold), “Slightly Reverse”, “Manufactured by S. ALLCOCK & CO., LTD. REDDITCH, ENGLAND.”, “100 Hooks.”, and “MADE IN ENGLAND” P.

On the right wrap edge, look for “Size” followed by a stamped “1” P. The container is a two-piece rectangular cardboard slide box with a white inner drawer rather than a flat sales card P.

Measurements & specifications

Features of the model, as recorded
FeatureRecordedEvidence
EyeTapered Eye, Turned Down
Show noteHide note

Tapered wire loop turned downward (T.D.E.), closed neatly against the shank neck with a smooth finish P.

OBS-1
WireExtra-Heavy (2X+), RoundCMP-3CMP-3 compared with 76 catalogued hooks classified Extra-Heavy (2X+)
Shank1X Long — PlainCMP-1CMP-1 compared with 118 catalogued hooks classified 1X Long
BendSproat, Standard gap
Show noteHide note

Rounded-bottom Sproat bend profile P. Lateral point deflection is marked "Slightly Reverse" on the box label P, though any offset angle is not measurable in the flat profile photograph.

OBS-3LBL-2
PointHollow Point
Show noteHide note

Single short, sharp cut barb positioned on the inner side immediately behind the point P.

OBS-5
FinishBronzed — judged from the photographs
Show noteHide note

Warm amber-brown bronzed tone across the wire surface with visible longitudinal wire-drawing grain P. Packaging text does not print a finish name.

OBS-6LBL-2

A hollow point has a concave inner curve machined or filed from the barb seat to the tip, reducing point mass and sharpening the inner edge P. Behind the tip sits a single short, close-cut barb on the inner face P.

The wire forms a tapered turned-down eye (labeled T.D.E.) closed cleanly against the plain round-section shank, with longitudinal wire-drawing grain visible through the amber-brown bronzed surface P. Platform silhouette comparisons place shank proportion in the 1X Long band (CMP-1) and wire thickness in the Extra-Heavy band (CMP-3). While the box specifies “Slightly Reverse” offset—indicating a slight rightward point deflection when viewed from the eye down the shank—no lateral angle is visible in the flat profile view P.

Measurements

Known manufactured size range: 1 V

Overall length13.7 mm PcaliperMEA-1
Shank length10.7 mm PcaliperMEA-2
Gap width4.7 mm PcaliperMEA-3
Wire diameter0.6 mm PcaliperMEA-4

Size 1, specimen S1. Bend depth, weight and the shank-to-gap ratio are in the full table.

All recorded values
Per size, with how each dimension was taken
SizeOverall lengthShank lengthGap widthBend depthWire diameterWeight
1Specimen S113.7 mm PcaliperMEA-110.7 mm PcaliperMEA-24.7 mm PcaliperMEA-3—0.6 mm PcaliperMEA-4—
Calibrated SVG True-scale preview

How the measurements are defined
How hook dimensions are measuredA hook outline with dimension lines for overall length, shank length, gap, bend depth, and wire diameter.Overall lengthShank lengthGapBend depthWire diameter
Overall length
Eye to the farthest point of the bend.
Shank length
Eye to the start of the bend.
Gap
Point to shank, at right angles to the shank.
Bend depth
Shank to the bottom of the bend.
Wire diameter
Across the wire, measured by caliper where possible.

Inferred Design · Model

Model 6812 T.D.E. pairs a tapered turned-down eye and Sproat bend with a concave hollow point and a slight rightward point offset to aid penetration while keeping knot bulk low.

How we got there

Basis: LBL-2 specifies "6812 T.D.E.", "BEST HOLLOW POI[?][?]", and "Slightly Reverse", while OBS-1, OBS-3, OBS-4, and OBS-5 record the tapered turned-down eye, Sproat bend, concave hollow point, and short cut barb.

Reasoning: Tapering the eye wire reduces metal mass at the head of a dressed fly, and the concave hollow point narrows the inner point profile behind a compact barb. A slight reverse offset angles the point marginally out of the shank plane to engage tissue on a straight pull.

Use & alternatives

  • Wet fly
  • Salmon
  • Sea trout

Primary application

Tapered turned-down eyes, Sproat bends, and bronzed finishes are standard features on traditional wet-fly, sea-trout, and salmon hooks. No catalog listing in this record specifies Allcock’s intended quarry or pattern list for model 6812.

Inferred Application · Model

The tapered turned-down eye, Sproat bend, and bronzed finish suit traditional wet flies, sea-trout patterns, and light salmon dressings.

How we got there

Basis: OBS-1, OBS-2, OBS-3, and OBS-6 document a tapered turned-down eye, plain round shank, Sproat bend, and bronzed finish on specimen S1.

Reasoning: British Redditch makers built tapered turned-down-eye Sproat hooks in bronzed high-carbon steel for wet flies and migratory trout or salmon patterns where a neat head, reliable bend strength, and subdued finish are standard.

Label & packaging

Specimens, packaging, and label

This record documents one specimen. It describes that specimen only, not every example of the model.

S1 · Slide box and size 1 hook

Size
1 (printed on the label)
Container
Box
Hook condition
Intact and clean with sharp point and barb, uniform amber-brown bronzed finish, and no active rust or pitting (P).
Packaging condition
Good — moderate wear, legible
Measured
size 1
Photographs
IMG-1IMG-2IMG-3
Detailed condition observations
Wear
top panel and wrapper edges: Age toning, scattered light foxing spots, minor surface soil, and slight rubbing along box corners and fold creases. LBL-4

Single photographed size 1 hook paired with its original 100-hook cardboard slide box (V1). Stored caliper measurements (13.72 mm overall length) conflict with the 0.1-inch grid background in IMG-3 (~39.2 mm) and remain under verification.

Full label transcription
LBL-1 trademark · top panel, upper left from IMG-1IMG-2
TRADE MARK.
LBL-2 printed · top panel and right side wrap from IMG-1IMG-2
6812 T.D.E.
BEST HOLLOW POI[?][?]
Slightly Reverse
Manufactured by
S. ALLCOCK & CO., LTD.
REDDITCH, ENGLAND.
100 Hooks. Size
MADE IN ENGLAND
LBL-3 stamp · right side wrap, right of Size from IMG-2
1
Trademark
Standing stag facing left on a short ground line with TRADE MARK. printed directly below, enclosed within a single black rectangular border line open along the right wrap edge.
As entered on the specimen record
TRADE MARK.
6812 T.D.E.
BEST HOLLOW POI[?][?]
Slightly Reverse
Manufactured by
S. ALLCOCK & CO., LTD.
REDDITCH, ENGLAND.
100 Hooks. Size
MADE IN ENGLAND
Layout
Single black rectangular border open along the right wrap edge; standing stag trademark in upper left; model and specification lines centered-right and wrapping onto the right side panel; stamped Size 1 on the right wrap.
Typeface
Serif and sans-serif letterpress typography in black ink with bold display numerals and product lines.
Printed marks
Stamped numeral 1 to the right of printed Size on the right side wrap.

Care of this specimen: Keep the hook inside the original cardboard slide box and inner drawer in a cool, dry environment away from direct sunlight and dampness; handle the paper wrapper by its edges.

Condition

Photographed hook is clean and intact with sharp point and barb, uniform bronzed finish, and no rust or pitting P. Slide box shows moderate age toning and light foxing P.

Storage and Preservation

Store the slide box and hooks in a cool, dry place out of direct sunlight to prevent fading of the cream paper wrapper and corrosion on the bronzed steel wire. Keep the hooks inside their original cardboard box and white inner drawer to protect the points and preserve packaging context.

Handle the box by its edges to minimize skin oils on the aged paper, and avoid aggressive polishing or chemical cleaners on the hooks; remove loose dust only with a soft dry brush. Store separately from dissimilar modern metals in a low-humidity enclosure.

Label and source analysis

Packaging Text and Offset Specification

Source: Printed and stamped wrapper text on S. Allcock & Co., Ltd. slide box for model 6812 T.D.E.

The slide-box wrapper prints “6812 T.D.E.” at top right, identifying the model number and tapered turned-down eye, followed by “BEST HOLLOW POI[?][?]” (clipped at the paper fold) and “Slightly Reverse” P. In standard hook terminology, “reverse” (or reversed) specifies a point deflected to the right when viewed from the eye down the shank.

Below the product title, the label records “Manufactured by S. ALLCOCK & CO., LTD. REDDITCH, ENGLAND.” alongside “100 Hooks.”, a stamped “Size 1” mark on the right wrap, and “MADE IN ENGLAND” at the base P. No finish name or production date appears on the examined surfaces P.

History & dating

Series

Packaging text identifies model 6812 as “T.D.E.” (tapered turned-down eye), “BEST HOLLOW POI[?][?]” (clipped at the wrapper edge), and “Slightly Reverse” P. No S. Allcock & Co. catalogs or company records are included in this entry to verify production dates, cataloged size ranges, or series variants.

Design lineage

The photographed hook pairs traditional British Sproat bend geometry and a concave hollow point with a tapered turned-down eye and a labeled “Slightly Reverse” offset P. Direct catalog lineage and contemporary model relationships are not documented in this record.

Dating

Printed label lacks a barcode, indicating pre-barcoding manufacture P. No catalog or company record in this entry establishes exact production dates.

Value & buying

This record does not establish scarcity or demand for Allcock model 6812. The photographed slide box documents the "Slightly Reverse" offset and "6812 T.D.E." label format, while collectability rating remains unverifiable without broader market and catalog evidence.

Basis: This record does not establish scarcity or demand; only a single specimen box and hook are documented.

This record does not establish scarcity or demand for Allcock model 6812. Collector interest rests on verifiable physical documentation: the intact two-piece slide box, Allcock’s standing stag trademark, Redditch attribution, and explicit printed specifications including “6812 T.D.E.” and “Slightly Reverse” P.

Complete original boxes with crisp printing and clean, unrusted hooks preserve the full factory context for tackle historians. Because no sold listings are recorded here, market value and rarity remain unrated.

No recorded sold sales are documented in this entry. Value depends on box completeness, label legibility, and hook condition.

Where to find

Check UK online auctions, vintage British tackle dealers, and tackle fairs for Allcock 100-hook slide boxes.

Estimate Value · Value scenario

Indicative collector value

USD 10.00–20.00 per packet

100 hook(s); good; intact cardboard slide box with inner drawer and legible wrapper. Estimated November 21, 2026. Our best estimate.

Our best estimate for a complete or nearly complete 100-hook Allcock 6812 T.D.E. slide box in good condition with clean bronzed hooks is $10 to $20 USD.

How we got there

Basis: IMG-1, IMG-2, and IMG-3 document an intact Allcock 100-hook slide box with legible letterpress label, stamped Size 1, and clean bronzed hook.

Reasoning: Mid-century Redditch 100-hook boxes from S. Allcock & Co. with intact inner drawers, readable model and offset text, and rust-free hooks typically trade in the $10 to $20 range among vintage British tackle collectors, while partial boxes or heavily stained wrappers bring less.

Inferred Collector interest · Model

Collector interest centers on Allcock's explicit "Slightly Reverse" offset wording and the intact 100-hook slide box bearing the Redditch standing stag trademark.

How we got there

Basis: LBL-1, LBL-2, and OBS-8 document the standing stag trademark, S. Allcock & Co., Ltd. Redditch imprint, "6812 T.D.E." code, "Slightly Reverse" offset label, and intact slide box.

Reasoning: Tackle historians and Redditch specialists value boxes that explicitly print minor point-offset specifications alongside model numbers, as loose hooks rarely retain documented offset provenance.

Sources & research

Sources & documentation

This specimen and its packaging — photographed, 3 images
Supports: Quantity per packageEyeBendFinishBarbCondition notes
+23 morefewerDating rangePackaging format codePackagingSecondary applicationsFly patternsCollectability summaryRarityCollectability ratingMarket value lowMarket value highMarket value notesWhere to findRarity basisMarket value basisMarket value as ofMarket sold observationsSummaryTechnical notesSeries historyDesign lineagePrimary applicationCollectability detailIdentification

Open questions

  1. Which sizes were cataloged for Allcock model 6812 T.D.E. Best Hollow Point, and during which years did S. Allcock & Co., Ltd. list it?This entry documents only a single size 1 box and contains no S. Allcock & Co. catalogs or dated price lists.Can you help? Share scans or page citations from dated S. Allcock & Co. catalogs showing model 6812 T.D.E. sizes, finishes, and years listed.

Entry updated November 21, 2026.