Marks: P photographically · V verified · I inferred · E estimated · S speculative What they mean
Photographic record
2 photographs · Hold Ctrl and scroll to zoom · drag to pan · double-click for 100%
IMG-1Tiemco — New entry — image 1 Tiemco TMC 109 BL hook assigned to the size 9 box, side view on grid paper.
1Identify
The Tiemco TMC 109 BL is a barbless fly hook. This entry documents size 9 only, from one box and one photographed hook.
The front of the box gives no intended use and no date, so the entry states neither.
How to identify it
The recorded box is a clear plastic case with a hang tab and a blue textured card inside. The card shows the TIEMCO wordmark beside a black emblem, the line FLY HOOKS, and a panel headed TMC 109 BL P.
The panel spells the wire description “EXTA FINE WIRE.” Below it are QTY 25, a size box and a hook outline. The card ends with “Made in Japan” and a distributor line for Umpqua Feather Merchants, Glide, Oregon P.
No maker’s mark is visible on the shank of the photographed hook, so identification rests on the box P. No date code or lot number appears on the front of the box.
Uniform black with a satin sheen; no plating color or bare steel shows P. The finishing process is not identified.
OBS-6
Construction
Barbless
The box describes the hook as down eye, wide gape, “EXTA FINE WIRE” (sic), 1X-3X variable long shank, barbless, black finish P.
A “1X-3X variable long” shank is a range of lengths, not a single rating. X-long ratings compare shank length with a standard-length hook. The box does not say which length applies to size 9.
Wire thickness is recorded as fine I. The box prints “EXTA FINE WIRE,” but the traced silhouette sits nearest the fine group among catalogued hooks.
The shank of the photographed hook is straight and plain, with no ridges, kinks or bends P.
Measurements
Overall length20.9 mmPcaliperMEA-1
Shank length17.1 mmPcaliperMEA-2
Gap width6 mmPcaliperMEA-3
Wire diameter0.6 mmPcaliperMEA-4
Size 9, specimen S1. Bend depth, weight and the shank-to-gap ratio are in the full table.
Hook appears intact and clean: no bending, rust or flaking visible. A few tiny pale specks sit in the finish near the point base and on the outer bend (P).
clear case, bottom edge: a few small white scuffs on the clear plastic LBL-10
Wear
card, lower right edge: tiny tan speck at the card edge LBL-11
The size 9 hook photographed on grid paper is probably from this box; nothing in the frame links the two. The clear case shows a few small white scuffs along the bottom edge, and the card has a tiny tan speck at its lower right edge. No tears, creases or fading are visible; the back of the box and the hooks beneath the card were not photographed.
Full label transcription
LBL-1 trademark · card, top, right of emblem fromIMG-2
Black emblem to the left of the TIEMCO wordmark: a stacked rounded dome with a zigzag band across it and horizontal bands below, on a flat base.
As entered on the specimen record
TIEMCO
FLY HOOKS
TMC 109 BL
DOWN EYE, WIDE GAPE,
EXTA FINE WIRE, 1X-3X
VARIABLE LONG SHANK,
BARBLESS, BLACK FINISH
QTY 25
SIZE
Made in Japan
DISTRIBUTED BY
UMPQUA FEATHER MERCHANTS
Glide, Oregon
Layout
Blue textured insert card printed in black. The wordmark sits at the top beside the emblem, with FLY HOOKS beneath it. The model and specification lines sit in a panel. Below QTY 25, a size box and a boxed hook outline sit side by side; the outline shows a side view with the bend at left and the eye at right. The origin and distributor lines run along the foot.
Typeface
TIEMCO is set in tall condensed black capitals. "Made in Japan" and "Glide, Oregon" are in mixed case; the other printed lines are in capitals.
Printed marks
Size entry "9" in the size box, below the printed word SIZE, in violet-grey ink. It appears to be stamped; handwriting is not ruled out.