Hook Reference › Partridge Hooks › Partridge CS51

Partridge of Redditch CS51

Marks: P photographically · V verified · I inferred · E estimated · S speculative What they mean

Photographic record

6 photographs

Profile view of a gray metal fishhook lying on grid paper, with a straight shank leading to a ring eye at one end and a round bend and point at the other.
IMG-1Partridge — New entry — image 1 Size 5/0 hook in profile on grid paper: straight shank, looped eye, round bend.

Identify

The Partridge CS51 is the hook that the maker’s card labels Homosassa. One size, 5/0, is recorded, from a single specimen with its card and bag.

No catalogue entry for this model was found, so its application, other sizes and production dates are not documented here.

How to identify it

The front label of the documented card prints the Partridge of Redditch wordmark, the name Homosassa and the code CS51 P. The bottom line reads Stainless Steel P.

No printed size appears on the front label. The boxes beside the code hold handwritten entries, 5/0 and 10, so confirm the size from the hook itself P.

The slip in the hook bag names the maker but not the model P. A loose hook has to be identified from its shape; see the technical notes.

Measurements & specifications

Features of the model, as recorded
FeatureRecordedEvidence
EyeBall Eye, Straight / Inline
Show noteHide note

Closed ring eye in line with the shank. The wire end curls back and stops against the shank, leaving a visible seam P.

OBS-1OBS-2IMG-1IMG-2
WireHeavy (1X Heavy), Forged
Shank1X Long — Plain
BendRound / Kendal, Standard gap
Show noteHide note

Broad, continuous round bend leading from a straight shank, with the point turning back toward the shank P.

OBS-3IMG-1
PointStandard / Spear
Show noteHide note

Single cut barb on the inner side of the point: a thin flat sliver angled back toward the bend, with a narrow slit at its base P.

OBS-5IMG-3
FinishBright / Uncoated Steel — stated on packaging
Show noteHide note

Uncoated-looking gray metal with a matte, finely pitted surface; no black, bronze or japanned coating is visible P. Tone varies among the hooks in the bag.

OBS-7IMG-1IMG-2IMG-3IMG-6

The documented 5/0 specimen is a single hook with a straight, plain shank. No kink, ridges, serrations or flattening are visible P. The point is a long taper with a narrow flat facet on its inner side P.

Its shank proportion is nearest the 1X long category I, meaning a shank about as long as that of the next larger hook size.

Offset and wire profile cannot be judged from the top-down photographs. A side or end view is needed.

Measurements

Overall length56 mm PcaliperMEA-1
Shank length45.2 mm PcaliperMEA-2
Gap width17.9 mm PcaliperMEA-3
Wire diameter2.1 mm PcaliperMEA-4

Size 5/0, specimen S1. Bend depth, weight and the shank-to-gap ratio are in the full table.

All recorded values
Per size, with how each dimension was taken
SizeOverall lengthShank lengthGap widthBend depthWire diameterWeight
5/0Specimen S156 mm PcaliperMEA-145.2 mm PcaliperMEA-217.9 mm PcaliperMEA-3—2.1 mm PcaliperMEA-4—
Calibrated SVG True-scale preview

How the measurements are defined
How hook dimensions are measuredA hook outline with dimension lines for overall length, shank length, gap, bend depth, and wire diameter.Overall lengthShank lengthGapBend depthWire diameter
Overall length
Eye to the farthest point of the bend.
Shank length
Eye to the start of the bend.
Gap
Point to shank, at right angles to the shank.
Bend depth
Shank to the bottom of the bend.
Wire diameter
Across the wire, measured by caliper where possible.

Use & alternatives

  • Saltwater

Label & packaging

This record documents one specimen. It describes that specimen only, not every example of the model.

S1 · Header card and bag, size 5/0

Size
5/0 (printed on the label)
Container
Card
Hook condition
Photographed hook: fine surface scratches and pitting; a tiny reddish mark or fibre on the shank near the eye; no bends or breaks visible (P). The bag holds further hooks that overlap and cannot be counted or assessed individually (P).
Packaging condition
Good — moderate wear, legible
Measured
size 5/0
Photographs
IMG-1IMG-2IMG-3IMG-4IMG-5IMG-6
Detailed condition observations
Wear
front label, right box, around the handwritten entry: white patch with flaking edges (correction fluid or paper; material unclear) covering an earlier entry; the earlier characters are not legible LBL-10
Wear
bag slip, at the end of the word PLEASE: small pale fleck; adjacent letters remain legible LBL-12
Wear
back panel, centre: small slit or puncture with torn, raised edges LBL-13
Wear
back panel, left and right edges at mid height; lower right: whitish scuffing of the glossy surface; a few orange specks near the printed telephone line LBL-16
Wear
hang slot, edge, front and back: frayed, fibrous paper edge with an uneven slot outline LBL-17

The photographed hook is assigned to this specimen as probable: nothing in its photographs ties it to the card or bag, and the bag is not shown attached to the card. Card damage: a small slit or puncture at the back centre with torn, raised edges; a frayed hang-slot edge; whitish scuffing at the back's left and right edges; a few orange specks near the printed telephone line. The bag slip has a small pale fleck at the end of PLEASE; adjacent letters remain legible.

Full label transcription
LBL-1 trademark · front label, top wordmark from IMG-5
PARTRIDGE
OF
REDDITCH
LBL-2 printed · front label, centre line from IMG-5
HOMOSASSA
LBL-3 printed · front label, left of three printed boxes from IMG-5
CS51
LBL-4 printed · front label, bottom line from IMG-5
Stainless Steel
LBL-5 printed · back panel, bottom centre from IMG-4
PARTRIDGE OF REDDITCH,
REDDITCH B97 4JE, ENGLAND.
TEL: (0527) 543555
LBL-6 printed · bag slip, top line from IMG-6
INSPECTED BY
LBL-7 printed · bag slip, lower block under rule from IMG-6
PLEASE SEND THIS SLIP
WITH ANY COMPLAINT
PARTRIDGE OF REDDITCH
LBL-8 handwritten · front label, middle box (brown ink or pencil) from IMG-5
5/0
LBL-9 handwritten · front label, right box, over white patch (black ink) from IMG-5
10
LBL-11 stamp · bag slip, centre, under INSPECTED BY from IMG-6
DOUG
LBL-14 pencil · back panel, lower centre-right from IMG-4
faint pencil lines; no legible text
LBL-15 pencil · back panel, left margin at mid height from IMG-4
faint diagonal pencil line; no legible text
Trademark
Large black display-serif wordmark PARTRIDGE with swash-tailed P and E; beneath it a drawn arc with arrow-tipped ends enclosing small OF above REDDITCH in serif capitals. Printed on a cream label with rounded corners applied to the card front.
As entered on the specimen record
PARTRIDGE
OF
REDDITCH
HOMOSASSA
CS51
Stainless Steel

PARTRIDGE OF REDDITCH,
REDDITCH B97 4JE, ENGLAND.
TEL: (0527) 543555

INSPECTED BY
PLEASE SEND THIS SLIP
WITH ANY COMPLAINT
PARTRIDGE OF REDDITCH
Layout
Front label, top to bottom: wordmark, HOMOSASSA, a row of three printed boxes with CS51 in the left box, then Stainless Steel. Back panel, bottom centre: maker address and telephone number. Bag slip: INSPECTED BY at the top, then a rule and three printed lines.
Typeface
Wordmark in large display-serif capitals with swash-tailed P and E; OF and REDDITCH in small serif capitals.
Printed marks
Stamp on the bag slip below INSPECTED BY: DOUG.
Later marks
Middle box on the front label: 5/0 (brown ink or pencil). Right box: 10 (black ink) over a white patch that covers an earlier entry; the earlier characters are not legible. Faint pencil lines on the back panel, lower centre-right and left margin, with no legible text.

History & dating

Dating

The card back prints the telephone number as (0527) 543555 P. Redditch's dialling code changed from 0527 to 01527 on 16 April 1995 V. A card printed with the old code was probably printed before that date I. When this card design came into use is not documented.

Partridge of Redditch Read the maker’s history →

Sources & research

Sources & documentation

This specimen and its packaging — photographed, 6 images
Supports: EyeBendConstructionBarbFinishGap width
+7 morefewerMeasurements availableMeasurement notesDating rangePackagingSummaryIdentificationTechnical notes

Open questions

  1. Which catalogue, price list or dealer record documents the CS51 Homosassa, and what application and size range does it give?No catalogue or dealer record naming this hook was found, so its intended application and the sizes made are undocumented.Can you help? Send a scan or link to a Partridge catalogue, price list or dated dealer listing that names CS51 or Homosassa, with the page number and date.

Entry updated October 29, 2026.