O. Mustad & Son 92625

Beak Hook — Special Long Shank

Marks: P photographically · V verified · I inferred · E estimated · S speculative What they mean

Photographic record

3 photographs

Side view of a single bronzed-looking fishhook with a downturned eye, straight shank, broad bend, and curved barbed point against a blue grid.
IMG-3Mustad — New entry — image 3 Side profile of the attributed size-4 hook, showing its downturned eye, straight shank, broad bend, and beaked point (P). Nominal size is not independently verified by this photograph.

Identify

Mustad cataloged the 92625 as a Beak Hook with a Special Long Shank V. The photographed Key Brand box is stamped with model 92625 and size 4 P. A loose hook attributed to that size is also documented, although its direct association with the box has not been independently confirmed.

How to identify it

Look for 92625 stamped in the QUAL. field and the hook size in the separate NO. field P. The photographed package has the Key Brand skeleton-key trademark, a large Mustad emblem, and a Norwegian-origin statement P.

The hook shown has a compact downturned eye, a substantially straight shank, and a strongly curved, barbed point P. Mustad’s catalog specifies a forged, reversed Beak Hook with a special long shank V. Shape alone is not sufficient to authenticate an unmarked loose example as model 92625.

Inferred Identification · Model

A useful provisional identification profile combines the small downturned eye, substantially straight shank, broad bend, and long inward-curving barbed point (I). The exact model is best confirmed by accompanying numbered packaging or manufacturer documentation.

How we got there

Basis: The photographs show the listed geometry, while the box supplies a stamped 92625 identity and the catalog specifies the named model design.

Reasoning: A combination of independently observed characteristics can help distinguish candidates more effectively than a single outline feature. Packaging supplies the stronger model-number evidence.

Measurements & specifications

Features of the model, as recorded
FeatureRecordedEvidence
EyeBall Eye, Turned Down
Show noteHide note

Mustad specifies a turned down small ball eye V. The photographed specimen has a compact rounded eye with a visible opening P.

SRC-1OBS-1
WireStandard, Forged
ShankShort (1X–2X Short) — Plain
BendSproat, Wide gap, Offset / kirbed
Show noteHide note

The photographed bend is broad and deep, with a relatively straight lower section before the point rises P. Its precise bend-family designation remains unverified.

OBS-2
PointBeak / Reversed
Show noteHide note

A single pronounced barb rises from the inner face of the point. The barb tip and the cut at its base are visible P.

OBS-4
FinishBronzed — stated on packaging
Show noteHide note

Mustad specifies a bronzed finish V. The photographed hook appears bronze-brown to olive-brown, with brighter reflective areas along the point P.

SRC-1SRC-2OBS-6

Mustad specifies a forged, reversed Beak Hook with a special long shank V. Reversed means the point is offset to the right when viewed from the eye down the shank. That direction comes from the manufacturer’s specification; it cannot be established from the supplied side view alone.

The photographed point curves inward and has a long, reflective inner taper P. The maker’s Special Long Shank designation is retained as historical terminology without assigning an unsupported numerical X-long grade.

Measurements

Overall length22.9 mm PcaliperMEA-1
Shank length17 mm PcaliperMEA-2
Gap width8.5 mm PcaliperMEA-3
Wire diameter1 mm PcaliperMEA-4

Size 4, specimen S1. Bend depth, weight and the shank-to-gap ratio are in the full table.

All recorded values
Per size, with how each dimension was taken
SizeOverall lengthShank lengthGap widthBend depthWire diameterWeight
4Specimen S122.9 mm PcaliperMEA-117 mm PcaliperMEA-28.5 mm PcaliperMEA-3—1 mm PcaliperMEA-4—
Calibrated SVG True-scale preview

How the measurements are defined
How hook dimensions are measuredA hook outline with dimension lines for overall length, shank length, gap, bend depth, and wire diameter.Overall lengthShank lengthGapBend depthWire diameter
Overall length
Eye to the farthest point of the bend.
Shank length
Eye to the start of the bend.
Gap
Point to shank, at right angles to the shank.
Bend depth
Shank to the bottom of the bend.
Wire diameter
Across the wire, measured by caliper where possible.

Inferred Design · Model

The combination of a beaked point, reversed offset, pronounced barb, and forged construction suggests a hook intended to balance point engagement with secure bait or fish retention (I). Such a balance cannot be quantified from the present evidence.

How we got there

Basis: The manufacturer specifies forged and reversed construction. The photographed point curves inward, has a long tapered face, and carries a raised barb.

Reasoning: Point curvature, offset, barb geometry, and wire shaping can influence contact and retention. Their possible combined function is a design interpretation rather than an experimentally established characteristic of 92625.

Use & alternatives

  • Bait fishing
  • Saltwater

Primary application

Mustad identifies the 92625 as a bait-fishing Beak Hook V. Its product description names flatfish, bream, cod, sea bass, and rays among possible targets, depending on hook size V. These are manufacturer-described uses for the model rather than a record of how the photographed specimen was used.

Inferred Application · Model

The special long shank and beaked point suggest a design suited to bait presentations needing shank space and a curved point (I). The maker's documented bait-fishing use is stronger evidence than any proposed fly-tying application.

How we got there

Basis: Mustad identifies the 92625 as a Beak Hook for bait fishing, with special long shank and reversed construction. The photographed hook shows a substantially straight shank, curved point, and prominent barb.

Reasoning: The shank provides a straight attachment area, while the beaked point changes the orientation of the tip relative to the gap. These physical features suggest practical rigging considerations without proving an original design intention beyond the maker's stated application.

Modern equivalents

Inferred Comparison · Model

The manufacturer-documented 92625-BR designation is the strongest reference for comparing later specifications with historical 92625 examples (I). Measurements should be compared dimension by dimension rather than assuming that the shared nominal size proves identical geometry.

How we got there

Basis: The 2018 catalog explicitly lists 92625 as the old reference for 92625-BR. Four physical-caliper values are recorded for the attributed size-4 specimen, with unverified endpoints.

Reasoning: An explicit manufacturer reference link establishes catalog identity more securely than a silhouette-only match. Direct dimension and point comparisons would reveal whether observed specimens share the same practical geometry.

Label & packaging

This record documents one specimen. It describes that specimen only, not every example of the model.

S1 · Mustad 92625 — labeled size-4 box and attributed loose hook

Size
4 (from the existing record)
Container
Box
Hook condition
The photographed hook appears intact, with its eye, barb, and point present (P). Small bright surface marks are visible on the bend and shank. Whether these reflect wear, finish irregularities, or corrosion has not been established.
Packaging condition
Fair — significant wear, partially legible
Measured
size 4
Photographs
IMG-1IMG-2IMG-3
Detailed condition observations
Wear
box, upper right corner and right edge: Creased and distorted upper corner, splitting and abrasion along the right edge, and a partially opened or displaced side flap. LBL-12
Wear
box, upper edge and front surface: Yellowing, scattered brown discoloration, creases, and localized surface wear. A translucent folded or taped area is visible near the upper right corner. LBL-13
Wear
front label, lower portion: The stamped entries are faded. The quantity is partly obscured by later dark writing; the label has discoloration, light scratches, and minor edge wear. LBL-14

The box directly documents Mustad 92625, size 4 P. The loose hook is attributed to that size in the existing record, but the photographs do not establish that it came from this particular box. The meaning of BEAR and handwritten 43 is unknown, and no current hook count is documented.

Full label transcription
LBL-1 printed · front label, upper center from IMG-1
MADE IN NORWAY
FABRIQUE EN NORVEGE
LBL-2 trademark · front label, upper right from IMG-1
KEY BRAND
FISH HOOKS
LBL-3 trademark · front label, center from IMG-1
MUSTAD
LBL-4 printed · front label, below trademark from IMG-1
O. MUSTAD & SON (U.S.A.) INC.
AUBURN, N.Y. 13021
LBL-5 printed · front label, lower columns from IMG-1
QUAL.
NO.
QTY.
LBL-6 stamp · front label, QUAL. field from IMG-1
92625
LBL-7 stamp · front label, NO. field from IMG-1
4
LBL-8 stamp · front label, QTY. field from IMG-1
[?]00
LBL-9 handwritten · front label, QTY. field from IMG-1
Dark horizontal strike-through over the faded quantity stamp.
LBL-10 handwritten · front label, QTY. field from IMG-1
43
LBL-11 handwritten · front label, bottom from IMG-1
BEAR
Trademark
Large cream-colored double-peak M design above MUSTAD, accompanied by a skeleton-key trademark and KEY BRAND FISH HOOKS lettering.
As entered on the specimen record
MADE IN NORWAY
FABRIQUE EN NORVEGE
KEY BRAND
FISH HOOKS
MUSTAD
O. MUSTAD & SON (U.S.A.) INC.
AUBURN, N.Y. 13021
QUAL.
NO.
QTY.
Layout
Blue rectangular label with rounded upper corners. The bilingual origin statement appears at the top, the skeleton-key trademark at upper right, the large Mustad emblem at center, and the company imprint below. QUAL., NO., and QTY. occupy three lower columns. Stamped entries and handwriting are documented separately from printed text.
Typeface
Printed uppercase lettering with a larger stylized MUSTAD wordmark. The model, size, and quantity entries are separately stamped and noticeably faded. Later dark handwriting is visually distinct from the printing.
Printed marks
QUAL. field stamp: 92625
NO. field stamp: 4
QTY. field stamp: [?]00
Later marks
Dark horizontal line through the original quantity field.
43 written in the QTY. area.
BEAR written below the printed columns.

Care of this specimen: Keep the box dry and supported without flattening its distorted right side. Avoid adhesive repairs over the label. Store the loose hook securely with its identification and retain a record of the uncertain box association.

Condition

The photographed hook appears intact, including its eye, point, and barb P. Small bright spots and surface irregularities are present; their causes have not been established.

History & dating

Design lineage

Mustad’s 2018 catalog lists 92625-BR and explicitly identifies 92625 as its old reference V. This establishes a manufacturer-documented relationship between the two designations. It does not, by itself, establish when the suffix was introduced or whether the hook’s construction changed.

O. Mustad & Son — The photographed box identifies Norway as its manufacturing origin and prints the company address as O. MUSTAD & SON (U.S.A.) INC., AUBURN, N.Y. 13021 P. The Auburn address is an imprint, not evidence of a factory location. Read the maker’s history →

Working hypothesis Period · Packaging

Packaging

A later-twentieth-century date is plausible for the photographed blue Key Brand box, based on its U.S. ZIP-code address and graphic packaging style (S). This is a tentative packaging estimate, not a date for the model's introduction.

How we got there

Basis: The front label identifies O. MUSTAD & SON (U.S.A.) INC., AUBURN, N.Y. 13021 and carries bilingual Norwegian-origin text, a Key Brand trademark, and the blue Mustad design (P).

Reasoning: The U.S. address format and printed trade dress provide broad dating clues. They do not identify a production batch, issue year, or exact decade.

Inferred Lineage · Model

The change from the historical 92625 reference to the cataloged 92625-BR designation may reflect a standardized finish or product-code convention rather than a redesigned hook (I). The documented old-reference relationship is firm; the reason for the revised designation remains open.

How we got there

Basis: The 2018 manufacturer catalog explicitly pairs 92625-BR with old reference 92625 and describes Bronze finish and Special Long Shank construction.

Reasoning: The BR suffix is compatible with the catalog's Bronze finish description, and the old-reference field indicates continuity of product identification.

Value & buying

The photographed box preserves a readable model and size identification, the Key Brand trademark, and an original Norwegian-origin statement P. These features help distinguish this packaging variant from other Mustad boxes. The later handwritten marks should be preserved and recorded separately from the printed and stamped information.

This record does not establish the model’s scarcity or collector demand. A numerical collectability rating and verified sold-price range therefore remain unassigned.

No recorded sold sales are included in the evidence record, so no verified market-value range is available. The quantity remaining in the photographed box and its direct relationship to the loose hook are not established.

Where to find

Search using both 92625 and the manufacturer-documented 92625-BR reference V. For a prospective purchase, compare the actual hook, stamped size, package wording, and stated contents rather than relying on the model number alone.

Sources & research

Sources & documentation

This specimen and its packaging — photographed, 3 images
Supports: Country of originSize documentedMeasurements availableMeasurement notesPackaging format codePackaging
+13 morefewerIs snelledSummaryIdentificationEyeBendBarbFinishCondition notesTechnical notesCollectability detailMarket value notesWhere to findManufacturer period context

Open questions

  1. When did Mustad first introduce model 92625?The examined manufacturer documents establish the model's design and later catalog references, but do not identify its introduction year.Can you help? Share a dated Mustad catalog or price list containing 92625, preferably with its cover, publication year, and model entry.

Entry updated November 14, 2026.