[wpdreams_ajaxsearchlite]
Hook Reference › O. Mustad & Son Hooks › Mustad Hooks – 3278

O. Mustad & Son 3278

Mustad 3278 Aberdeen

Marks: P photographically · V verified · I inferred · E estimated · S speculative What they mean

Photographic record

3 photographs

Mustad 3278 Aberdeen — full profile showing Aberdeen bend and straight ring eye — size 5/0 — bronzed finish
IMG-2Mustad 3278 Aberdeen Full Profile Size 5/0 Side profile of the Mustad 3278 size 5/0 hook on a 0.1-inch grid showing the straight inline ball eye, long shank, and wide Aberdeen bend (P).

Identify

The Mustad 3278 is an Aberdeen-bend bait hook manufactured by O. Mustad & Son in Norway P. Photographed size 5/0 specimens feature a straight inline ball eye, a long plain round-wire shank, a wide rounded Aberdeen bend, and a superior point with a close-cut inner barb P.

Physical caliper measurements for size 5/0 record an overall length of 2.318 inches (58.88 mm), a shank length of 1.711 inches (43.46 mm), and a gap width of 0.691 inches (17.55 mm) P. The examined hooks retain a uniform dark bronzed finish without corrosion and are accompanied by a handwritten collector identification card marked Mustad 3278 5/0 P.

How to identify it

Look for a straight inline ball eye that meets the shank cleanly without an open gap, paired with a plain round-wire 3X long shank P. Check the bend for the wide, flat-bottomed Aberdeen throat curve whose front leg runs parallel to the shank, and examine the point for the nearly straight inner taper of a Mustad superior point P.

No factory stamping or model mark appears on the examined hooks in these photographs P. Confirm model 3278 examples through original labeled packaging or reliable accompanying collector documentation when loose P.

Inferred Identification · Model

Loose Mustad 3278 hooks are distinguished from turned-eye Aberdeen patterns by their straight inline ball eye, bronzed finish, and superior point profile.

How we got there

Basis: The examined hooks exhibit an un-angled inline ball eye, uniform dark bronzed coating, plain round shank, and a nearly straight inner point taper.

Reasoning: Many classic Aberdeen hooks feature turned-down or turned-up eyes, blued or nickelled finishes, or hollow/spear points, so confirming the inline eye, bronze coating, and flat inner point face narrows identification when factory packaging is absent.

Measurements & specifications

Features of the model, as recorded
FeatureRecordedEvidence
EyeBall Eye, Straight / Inline
Show noteHide note

Straight inline ball eye formed cleanly with the wire end meeting the shank without a gap P.

OBS-1
WireExtra-Fine, RoundMEA-4
Shank3X Long — Plain
BendAberdeen, Standard gap
Show noteHide note

Wide, rounded Aberdeen bend with a flat-bottomed throat curve and a front leg running parallel to the shank P.

OBS-2
PointSuperior
Show noteHide note

Single close-cut inner barb angled sharply back toward the bend P.

OBS-4
FinishBronzed — judged from the photographs
Show noteHide note

Uniform dark bronzed finish displaying warm golden-brown highlights along the curved wire surfaces P.

IMG-3LBL-1OBS-6

The hook is formed from round wire with a uniform dark bronzed coating and no forging, slices, or shank ridges P. Its superior point features a nearly straight inner face—the flat profile between the barb throat and the tip—aligned parallel to the shank, paired with a single close-cut barb P.

Size 5/0 caliper measurements document a 0.045-inch (1.14 mm) wire diameter and 0.715 g weight alongside the 3X long shank proportion P. A minor factory tooling indentation is visible on the lower bend curve below the barb on the examined specimen P.

Measurements

Overall length58.9 mm PcaliperMEA-1
Shank length43.5 mm PcaliperMEA-2
Gap width17.6 mm PcaliperMEA-3
Wire diameter1.14 mm PcaliperMEA-4

Size 5/0, specimen S1. Bend depth, weight and the shank-to-gap ratio are in the full table.

All recorded values
Per size, with how each dimension was taken
SizeOverall lengthShank lengthGap widthBend depthWire diameterWeightShank:gap
5/0Specimen S158.9 mm PcaliperMEA-143.5 mm PcaliperMEA-217.6 mm PcaliperMEA-315.2 mm Egrid photoMEA-91.14 mm PcaliperMEA-4.715g Pmethod not recorded2.48 : 1
Calibrated SVG True-scale preview

How the measurements are defined
How hook dimensions are measuredA hook outline with dimension lines for overall length, shank length, gap, bend depth, and wire diameter.Overall lengthShank lengthGapBend depthWire diameter
Overall length
Eye to the farthest point of the bend.
Shank length
Eye to the start of the bend.
Gap
Point to shank, at right angles to the shank.
Bend depth
Shank to the bottom of the bend.
Wire diameter
Across the wire, measured by caliper where possible.
Catalog records. Standard production hook with no notable records within the garrenwood.com catalog

Inferred Design · Model

Pairing extra-fine wire gauge proportions with a wide Aberdeen bend and superior point prioritizes easy bait penetration and low bait damage over heavy structural rigidity.

How we got there

Basis: Silhouette comparison places the wire gauge in the extra-fine category alongside a 3X long shank, wide Aberdeen bend, and nearly straight inner-taper superior point.

Reasoning: Thinner wire punctures live or soft natural baits with less tearing and allows quicker point penetration on light-to-moderate hooksets, though the long shank and wide bend create leverage that can open under heavy drag.

Use & alternatives

  • Bait fishing
  • Saltwater

Primary application

Designed for natural bait fishing in freshwater and saltwater environments where a long shank and wide gap accommodate larger baits I. The straight inline eye aligns directly with the shank for straightforward snelling or direct line attachment P.

Other uses

Suitable for larger bait presentations where a long shank and wide gap are required I.

Fly patterns

Not a standard fly-tying pattern; primarily a bait hook.

Inferred Application · Model

The Mustad 3278 is suited to natural bait fishing with whole worms, minnows, or cut bait where a long shank aids bait threading and hook removal.

How we got there

Basis: The hook combines a 3X long plain round-wire shank, a wide rounded Aberdeen bend, a straight inline ball eye, and a superior point with a close-cut barb.

Reasoning: A long straight shank holds elongated natural baits cleanly along the wire and provides leverage for unhooking, while the wide flat-bottomed Aberdeen throat gives ample clearance around bulky baits without crowding the point gap.

Label & packaging

Specimens, packaging, and label

This record documents one specimen. It describes that specimen only, not every example of the model.

S1 · Size 5/0 hooks with handwritten ID card

Size
5/0 (printed on the label)
Container
Card
Hook condition
Unused condition with uniform dark bronzed finish, sharp point, no rust, and a minor factory tooling indentation on the lower bend curve below the barb.
Packaging condition
Excellent — minimal wear
Measured
size 5/0
Photographs
IMG-1IMG-2IMG-3

Two matching size 5/0 hooks photographed with the handwritten identification card; caliper measurements recorded from this specimen.

Full label transcription
LBL-1 handwritten · white index card, center and lower right from IMG-3
Mustad
3278
5/0
As entered on the specimen record
Layout
Unruled white index card placed above the hooks on a 0.1-inch grid.
Later marks
Mustad
3278
5/0 (blue ballpoint ink, center and lower right)

Care of this specimen: Store dry and separated from other metal tackle; keep paired with the handwritten index card.

Condition

Unused condition with uniform bronzed finish, sharp point, and no rust; minor factory tooling indentation on the lower bend curve below the barb P.

Storage and Preservation

Store Mustad 3278 hooks in a dry, low-humidity environment to protect the bronzed finish from rust and moisture spotting P. Keep loose hooks separated in compartmentalized boxes or acid-free envelopes so the points and straight inline ball eyes do not abrade one another.

Retain the accompanying identification card alongside the hooks to preserve the recorded model and size documentation P.

Inferred Packaging · Packaging

The unruled white index card inscribed 'Mustad 3278 5/0' in blue ballpoint ink functions as a collector or researcher specimen tag rather than factory packaging.

How we got there

Basis: IMG-3 shows a plain hand-cut or standard unruled white index card with handwritten blue ballpoint text and no printed Mustad branding, quantity mark, or factory box structure.

Reasoning: O. Mustad & Son packaged production hooks in printed paper packets or cardboard boxes bearing the Key Brand trademark, whereas hand-lettered index cards are standard bench labels used to keep loose bulk hooks identified.

Label and source analysis

Research Documentation

The unruled white index card accompanying the hooks is inscribed in blue ballpoint ink across three lines: Mustad / 3278 / 5/0 P. This handwritten notation records the maker, model code, and hook size for specimen identification in the absence of original factory packaging P.

History & dating

Series

O. Mustad & Son produced model 3278 as a straight-eye Aberdeen pattern in its numbered hook catalog. The model combines a long plain shank with a wide Aberdeen bend and superior point geometry for general bait fishing.

No dated factory catalog or original box accompanies this record, so exact introduction and discontinuation years remain open.

Design lineage

Model 3278 follows the traditional Aberdeen profile—characterized by a wide, rounded throat curve and long straight shank—adapted to Mustad’s machine-formed wire construction with a straight inline ball eye and superior point P.

Value & buying

3 / 10CollectabilityRarity: Common

A classic Norwegian-made Aberdeen bait hook model; this record does not establish scarcity or demand.

Basis: This record does not establish scarcity or demand.

Collectability for the Mustad 3278 centers on complete, original Mustad packaging and clean condition rather than the loose hooks alone. Because no recorded sold transactions or catalog production figures are documented in this entry, market scarcity and collector demand cannot be established from the current record.

No recorded sold sales exist for this model in the reference database.

Where to find

Check vintage tackle dealers, online auctions, and tackle shows for loose or boxed examples.

Estimate Value · Value scenario

Indicative collector value

USD 2.00–6.00 per lot

2 hook(s); unused with intact bronzed finish; unprinted handwritten collector index card. Estimated November 21, 2026. Our best estimate.

Our best estimate for a loose pair of unused Mustad 3278 size 5/0 hooks accompanied only by a handwritten collector identification card is $2 to $6 USD.

How we got there

Basis: Two unused bronzed size 5/0 hooks with intact finish and sharp points are paired with a handwritten index card rather than a printed Mustad factory box or packet.

Reasoning: Standard production Norwegian Mustad bait hooks in common large sizes without original printed packaging trade primarily for utility or filler-lot value among tackle collectors, whereas boxed examples command higher multiples.

Inferred Collector interest · Model

Collector appeal for the Mustad 3278 lies mainly in completing Mustad numbered-series reference runs and preserving intact vintage boxes or packets.

How we got there

Basis: The hook is an unmarked production Aberdeen pattern with no special collector sub-brand, designer attribution, or ornamental finish visible on the metal.

Reasoning: Because unmarked loose Mustad bait hooks cannot be visually authenticated to a specific catalog number once separated from their label, collector interest concentrates on surviving factory packaging.

Sources & research

Sources & documentation

This specimen and its packaging — photographed, 3 images
Supports: ConstructionFinishWireShank gap ratioMeasurement methodSize measured
+26 morefewerMeasurement notesCondition notesPackagingDating rangeMarket value lowMarket value highMarket value notesMarket value basisMarket sold observationsWhere to findRarity basisCollectability summaryEyeBendBarbSecondary applicationsFly patternsFun fact titleFun factSummaryIdentificationTechnical notesSeries historyDesign lineagePrimary applicationCollectability detail

Open questions

  1. Does an original O. Mustad & Son catalog page or factory box for model 3278 document its official shank length designation, wire gauge, and production years?No factory box, packet label, or Mustad catalog listing is present in this record to confirm official catalog specifications or production dates.Can you help? Share clear photographs of a labeled Mustad 3278 box or a dated Mustad catalog page listing model 3278.

Entry updated November 21, 2026.