[wpdreams_ajaxsearchlite]
Hook Reference › O. Mustad & Son Hooks › Mustad Hooks – 3866

O. Mustad & Son 3866

3866

Marks: P photographically · V verified · I inferred · E estimated · S speculative What they mean

Photographic record

3 photographs

Mustad 3866 Quality Sneck Hook — side profile showing tapered shank and bend geometry — size 6/0 — bronzed finish
IMG-3Mustad 3866 Quality Sneck Hook Profile Size 6/0 Side profile of the Mustad 3866 size 6/0 hook showing the transverse scored blind taper, bronzed finish, and rounded U-shaped bend on a 0.1-inch grid (P).

Identify

Mustad 3866 is documented here by a size 6/0 blind-eye specimen accompanied by a handwritten pencil slip reading “O. Mustad / Qual. 3866 / H.P. Tapered / #6/0 / Sneck” P. Built on round wire measuring 0.063″ (1.60 mm) in diameter, the hook has a dark bronzed finish, a straight shank with a scored tapered blind end, and a long sharp point with a single inner barb P.

While the accompanying note writes “Sneck” and “H.P.” (Hollow Point), macro photography of this specimen shows a smoothly rounded U-shaped bend without squared corners and a nearly straight inner point face from tip to barb P. Because the paper slip is undated and lacks factory printing, production dates and catalog specifications for model 3866 remain open to verification P.

How to identify it

Look for a blind tapered shank end stamped or scored with transverse grip ridges on the upper and lower surfaces, paired with a dark bronzed finish and lighter uncoated brassy metal along the taper P. Verify whether the bend shows the continuous U-shaped curve photographed on this specimen or angular sneck corners, and check the inner face of the point for a straight taper versus a concave hollow grind P.

When inspecting loose examples paired with handwritten tackle-shop or collector slips, keep the hook and slip together and check for original printed Mustad packets or boxes carrying “Qual. 3866” to confirm factory attribution (P, I).

Working hypothesis Identification · Specimen S1

The photographed hook may represent either a rounded-bend variant of Mustad 3866 or a loose blind-eye hook paired in a collection with a slip written for a sneck-bend hook.

How we got there

Basis: LBL-1 records Sneck and H.P. Tapered in pencil, whereas OBS-3 documents a smoothly rounded U-shaped bend and OBS-4 shows a nearly straight inner point face.

Reasoning: Handwritten collector or shop slips can summarize legacy catalog names loosely or occasionally become matched with a different blind-eye hook of the same size when loose specimens are organized.

Measurements & specifications

Features of the model, as recorded
FeatureRecordedEvidence
EyeBlind — Marked Tapered Shank
Show noteHide note

Blind tapered shank end with transverse scored grip ridges along the upper and lower surfaces for binding a gut or silk snell P.

OBS-1
WireFine (1X Fine), RoundMEA-4
Shank2X Long — Marked / ridged, TaperedOBS-1OBS-2
BendSneck, Standard gap
Show noteHide note

Accompanying pencil slip writes Sneck, while the photographed hook shows a smoothly rounded U-shaped bend with no squared corners or lateral offset P.

OBS-3LBL-1
PointHollow Point
Show noteHide note

Single medium-depth sharp barb cut cleanly on the inner side of the point and angled back toward the bend P.

OBS-5
FinishBronzed — judged from the photographs
Show noteHide note

Even dark bronzed finish over the main shank, bend, and point, with lighter brassy uncoated metal on the scored taper and bare steel in the point grind P.

LBL-1OBS-6

The front of the shank tapers smoothly to a blind end—a classic eyeless construction designed to be whipped directly to a twisted gut or silk loop—and carries transverse scored grip ridges on its upper and lower surfaces to anchor the binding P. Bare brassy metal shows along the scored taper and inside the ground point and barb cut, contrasting with the dark bronzed coating across the body P.

In side profile, the bend forms a continuous U-shaped curve with the point leg lying in plane with the shank rather than offset to either side P. On the macro point view, the inner face between the tip and the single angled barb follows a nearly straight taper rather than a deep concave hollow grind P.

Measurements

Overall length59.3 mm PcaliperMEA-1
Shank length51.6 mm PcaliperMEA-2
Gap width17.7 mm PcaliperMEA-3
Wire diameter1.6 mm PcaliperMEA-4

Size 6/0, specimen S1. Bend depth, weight and the shank-to-gap ratio are in the full table.

All recorded values
Per size, with how each dimension was taken
SizeOverall lengthShank lengthGap widthBend depthWire diameterWeightShank:gap
6/0Specimen S159.3 mm PcaliperMEA-151.6 mm PcaliperMEA-217.7 mm PcaliperMEA-314.5 mm Egrid photoMEA-51.6 mm PcaliperMEA-41.215g Pmethod not recorded2.93 : 1
Calibrated SVG True-scale preview

How the measurements are defined
How hook dimensions are measuredA hook outline with dimension lines for overall length, shank length, gap, bend depth, and wire diameter.Overall lengthShank lengthGapBend depthWire diameter
Overall length
Eye to the farthest point of the bend.
Shank length
Eye to the start of the bend.
Gap
Point to shank, at right angles to the shank.
Bend depth
Shank to the bottom of the bend.
Wire diameter
Across the wire, measured by caliper where possible.
Catalog records. Single size 6/0 specimen documented with physical caliper measurements and an accompanying handwritten pencil note card P.

Inferred Design · Model

The transverse grip ridges scored along the tapered blind end of the shank are engineered to keep whipped gut or silk snell loops from slipping under heavy tension.

How we got there

Basis: OBS-1 and OBS-2 show a blind tapered shank end with distinct transverse notches along the upper and lower surfaces, paired with 0.063-inch round wire (MEA-4).

Reasoning: Without a formed eye to stop a knot or loop, a smooth tapered shank risks shedding its binding when wet or heavily loaded; cutting transverse ridges into the taper creates mechanical purchase for thread wraps.

Use & alternatives

  • Salmon
  • Saltwater
  • Bait fishing

Primary application

At size 6/0 with a 2.333″ (59.26 mm) length and 0.063″ (1.60 mm) wire, this blind-eye hook fits traditional heavy bait fishing and classic Atlantic salmon fly dressing where a gut or silk snell is whipped directly onto the tapered shank (P, I). The transverse grip ridges at the front of the taper prevent the whipped loop from pulling free under heavy tension I.

Other uses

Large freshwater and saltwater bait or fly rigs requiring a snelled blind-eye hook I.

Fly patterns

Classic Atlantic salmon flies dressed on blind-eye hooks I.

Inferred Application · Specimen S1

At 2.333 inches overall length on 0.063-inch wire with a scored tapered blind eye, this size 6/0 hook suits traditional snelled heavy bait rigs and classic large Atlantic salmon flies.

How we got there

Basis: LBL-1 marks the hook #6/0, MEA-1 records 59.26 mm overall length, MEA-4 records 1.60 mm wire diameter, and OBS-1 documents the scored blind tapered eye.

Reasoning: Large 6/0 hooks on heavy wire provide the gape and strength needed for large marine or anadromous fish, while the blind tapered eye matches pre-eyed gut-leader snelling practices.

Modern equivalents

Modern equivalents
HookMatchNotes
Partridge CS10/6GoodMaintains blind eye construction for traditional salmon fly tying, though bend profile differs
Mustad 38912ModerateSimilar sneck bend geometry but features modern ringed eye instead of tapered shank

Label & packaging

Specimens, packaging, and label

This record documents one specimen. It describes that specimen only, not every example of the model.

S1 · Size 6/0 hook with handwritten pencil slip

Size
6/0 (printed on the label)
Container
Card
Hook condition
Clean, straight, and intact with sharp point and barb, even dark bronzed body finish, and no active rust (P).
Packaging condition
Very Good — light wear, fully legible
Measured
size 6/0
Photographs
IMG-1IMG-2IMG-3

Blind tapered eye with transverse scored grip ridges; bend is a smoothly rounded U-shape without lateral offset, and point inner face is nearly straight P.

Full label transcription
LBL-1 pencil · ruled face of white note card from IMG-1
O. Mustad
Qual. 3866
H.P. Tapered
#6/0
Sneck
As entered on the specimen record
O. Mustad
Qual. 3866
H.P. Tapered
#6/0
Sneck
Layout
Five lines written in pencil across the horizontal blue rules of a trimmed white paper slip P.
Typeface
Handwritten in cursive and block pencil lettering; no printed type is present on the photographed face P.
Later marks
O. Mustad / Qual. 3866 / H.P. Tapered / #6/0 / Sneck in pencil on the ruled face P.

Care of this specimen: Store dry away from moisture and dissimilar metals, keeping the hook and ruled pencil slip together in an archival sleeve I.

Condition

Hook is clean, straight, and intact with a sharp point and barb and no active rust; accompanying ruled paper slip has clean, legible pencil writing P.

Storage and Preservation

Store the hook in a dry, low-humidity environment to protect the bronzed finish and the bare steel exposed along the scored taper and ground point P. Keep the hook and its handwritten ruled paper slip together in an archival sleeve or compartmented box so the pencil notes remain legible and associated with the specimen (P, I).

Inferred Packaging · Packaging

The trimmed blue-ruled paper slip is a secondary tackle-shop or collector identification card rather than original O. Mustad & Son factory packaging.

How we got there

Basis: IMG-1 and LBL-1 show five lines of handwritten pencil text on plain lined notepaper with minor uneven edge trim and no printed factory branding.

Reasoning: Mustad distributed production hooks in printed paper packets, envelopes, or labeled boxes; handwritten pencil specifications on cut ruled paper are characteristic of individual collector or dealer cataloging.

Label and source analysis

Notation Card Documentation

The white blue-ruled paper slip accompanying the hook is inscribed in pencil across five lines: “O. Mustad / Qual. 3866 / H.P. Tapered / #6/0 / Sneck” P. The card carries no printed Mustad trademark, date stamp, or factory lot code, indicating a handwritten dealer, shop, or collector identification note rather than factory packaging (P, I).

History & dating

Series

The handwritten slip accompanying the photographed specimen identifies the hook as “O. Mustad / Qual. 3866” alongside the descriptive terms “H.P. Tapered”, “#6/0”, and “Sneck” P. No primary O. Mustad & Son catalog entry or factory packet for model 3866 has been located in this record to verify the model’s introduction, production span, or standard catalog specifications.

Because the photographed specimen exhibits a smoothly rounded bend and a nearly straight inner point face that differ from the slip’s “Sneck” and “H.P.” notes, original factory documentation is needed to confirm whether model 3866 was cataloged with an angular sneck bend and hollow point or with the geometry seen here (P, I).

Dating

Accompanying ruled slip carries undated pencil notes with no factory printing, date stamp, or archival provenance to establish manufacturing years P.

Inferred Period · Packaging

Packaging

The notation style using 'Qual.' and 'H.P. Tapered' reflects mid-twentieth-century collector or dealer cataloging conventions.

How we got there

Basis: LBL-1 transcribes 'O. Mustad / Qual. 3866 / H.P. Tapered / #6/0 / Sneck' in pencil on clean blue-ruled paper (OBS-7).

Reasoning: Collectors and tackle dealers organizing vintage blind-eye stock commonly copied Mustad catalog prefixes such as 'Qual.' and point abbreviations like 'H.P.' onto lined index slips.

Value & buying

6 / 10CollectabilityRarity: Scarce

This record does not establish scarcity or demand for Mustad model 3866; collector interest centers on blind-eye construction and period slip documentation I.

This record does not establish scarcity or demand for Mustad model 3866, as no primary catalog listing, production total, or recorded auction sales are available in the evidence file. Collector appeal rests on the hook’s traditional scored tapered blind eye, large 6/0 salmon and saltwater proportions, and preserved period collector or shop slip (P, I).

Because the specimen’s rounded U-shaped bend and straight-faced point diverge from the “Sneck” and “H.P.” terms written on its accompanying slip, examples accompanied by original printed Mustad packaging or catalog citations carry strong documentation value for resolving the model’s factory specification (P, I).

No recorded sold sales exist for Mustad model 3866 in this record, so no market price range is established P.

Where to find

Vintage tackle lots, estate sales, and specialist salmon-fly or antique hook auctions I.

Inferred Collector interest · Model

Collector interest in Mustad 3866 centers on its traditional blind tapered eye with scored snelling ridges and large 6/0 proportions suited to classic salmon-fly study.

How we got there

Basis: OBS-1 and OBS-2 show the scored blind tapered shank, LBL-1 records the #6/0 size and Quality designation, and OBS-7 documents clean physical preservation.

Reasoning: Blind-eye hooks with factory-scored tapers illustrate pre-eyed hook-making craftsmanship and remain useful reference pieces for tyers studying historical Atlantic salmon hook patterns.

Sources & research

Sources & documentation

This specimen and its packaging — photographed, 3 images
Supports: ConstructionShankFinishOffset kirbedWireShank gap ratio
+26 morefewerEyeBendBarbCondition notesMeasurement notesCumulative records noteDating rangePackagingHook type applicationSecondary applicationsFly patternsCollectability summaryMarket value lowMarket value highMarket value basisMarket sold observationsMarket value notesWhere to findFun fact titleFun factSummaryTechnical notesSeries historyPrimary applicationIdentificationCollectability detail

Open questions

  1. Does an original O. Mustad & Son catalog list model 3866 with an angular sneck bend and hollow point, or with the rounded U-shaped bend and straight-faced point photographed here?No primary Mustad catalog page or factory-labeled package for model 3866 is present in this record.Can you help? Share a scan or photograph of an original Mustad catalog entry or factory box label showing model 3866.

Entry updated November 22, 2026.