Hook Reference › Harrison’s Hooks › Harrison 2987 — Sproat Hooks

Harrison's Hooks 2987

Sproat Hooks

Marks: P photographically · V verified · I inferred · E estimated · S speculative What they mean

Photographic record

2 photographs

Side view of a Harrison 2987 size 1/0 Sproat hook on gridded paper, showing a straight shank, rounded bend, cut barb and dark blue-black finish.
IMG-2Harrison — New entry — image 2 Harrison 2987 Sproat hook, size 1/0, photographed from the side. The plain shank, broad bend and raised cut barb are visible. Brown corrosion is concentrated near the point and barb.

Identify

Harrison’s model 2987 is identified on its original box as SPROAT HOOKS. P. This record documents one hook, labelled size 1/0, together with the box from which it came P.

How to identify it

Look for the HARRISON’S banner on a ruled paper box label, with model number 2987 at the upper right. A left-facing fish trademark separates the manufacturer information from the large, letterspaced SPROAT HOOKS. designation P.

The label also prints CELEBRATED SPRING STEEL and identifies the hooks as Ringed. The recorded box has 1/0 written faintly in pencil after No.; the printed 100 indicates the labelled package quantity, not the number of surviving hooks P.

Inferred Identification · Model

The most useful identification combination is the Harrison's name, model number 2987, Sproat designation and Ringed. wording. Together, these printed details distinguish the labelled product more reliably than its outline alone.

How we got there

Basis: The box explicitly prints the manufacturer, model number, Sproat hook name and ringed designation. The specimen has a broad rounded bend and plain shank.

Reasoning: A similar hook silhouette can occur across makers and product families, while the combined manufacturer and model markings tie the photographed example to a specific labelled product.

Measurements & specifications

Features of the model, as recorded
FeatureRecordedEvidence
EyeBall Eye, Straight / Inline
Show noteHide note

The box specifies Ringed. P. The eye end is thickened, rounded and approximately inline, but its aperture is not clearly resolved in side view P.

LBL-8OBS-1
WireFine (1X Fine)OBS-5IMG-2
Shank1X Long — Plain
BendSproat, Standard gap
Show noteHide note

Broad, continuous rounded bend leading into a shorter, nearly level point-bearing section P. The box identifies the pattern as Sproat Hooks.

LBL-7OBS-2
PointStandard / Spear
Show noteHide note

One small cut barb on the inner side of the point, set back from the tip P.

FinishBlued — judged from the photographs
Show noteHide note

Glossy dark blue-black coating with blue highlights P, consistent with a blued finish I. The package does not specify the finish process.

OBS-6LBL-6LBL-7

The photographed size 1/0 hook has a straight, plain shank of relatively uniform thickness, without visible bait-holder cuts or maker markings on the exposed face P.

The point-bearing leg extends toward the eye, approximately parallel to the shank. Its tapered point has substantial surface corrosion, limiting identification of its original sharpening geometry P. The single side view does not establish a forged-wire cross-section or any lateral point offset.

Measurements

Overall length38.8 mm EcaliperMEA-1
Shank length29.9 mm EcaliperMEA-2
Gap width12.4 mm EcaliperMEA-3
Wire diameter1.2 mm EcaliperMEA-4

Size 1/0, specimen S1. Bend depth, weight and the shank-to-gap ratio are in the full table.

All recorded values
Per size, with how each dimension was taken
SizeOverall lengthShank lengthGap widthBend depthWire diameterWeight
1/0Specimen S138.8 mm EcaliperMEA-129.9 mm EcaliperMEA-212.4 mm EcaliperMEA-3—1.2 mm EcaliperMEA-4—
Calibrated SVG True-scale preview

How the measurements are defined
How hook dimensions are measuredA hook outline with dimension lines for overall length, shank length, gap, bend depth, and wire diameter.Overall lengthShank lengthGapBend depthWire diameter
Overall length
Eye to the farthest point of the bend.
Shank length
Eye to the start of the bend.
Gap
Point to shank, at right angles to the shank.
Bend depth
Shank to the bottom of the bend.
Wire diameter
Across the wire, measured by caliper where possible.

Inferred Design · Model

The visible design combines a broad bend with a plain straight shank and one raised cut barb. This arrangement provides an open interior and an unobstructed shank surface, with the barb forming a mechanical projection behind the point.

How we got there

Basis: The side photograph records a continuous rounded bend, relatively level point-bearing section, plain shank and a single raised cut barb.

Reasoning: The bend creates the space between shank and point, while the unmodified shank avoids the interruptions found on bait-holder patterns. The raised barb introduces a retaining projection behind the tapered tip.

Use & alternatives

Inferred Application · Model

The size 1/0 hook's long, unobstructed shank offers room for substantial traditional fly dressings. Large wet flies and streamer-style dressings are practical possibilities for a hook of this form.

How we got there

Basis: The specimen has a plain straight shank, broad rounded bend, raised barb and recorded size 1/0 designation.

Reasoning: A plain shank provides a continuous tying surface, while the broad bend and forward-facing point permit a substantial dressing to be positioned behind the eye. These are practical tying considerations drawn from the geometry rather than claims about Harrison's original intended fisheries.

Modern equivalents

Inferred Comparison · Specimen S1

A practical comparison should start with the recorded 38.8 mm overall length, 29.9 mm shank length, 12.4 mm gap and 1.2 mm wire diameter. Together, these dimensions provide a more useful physical comparison than matching the nominal 1/0 size alone.

How we got there

Basis: Four existing physical-caliper records are carried forward for the paired size 1/0 specimen.

Reasoning: Hook sizing conventions can differ between manufacturers and periods. Comparing the specimen's individual recorded dimensions helps distinguish hooks with similar nominal labels but different proportions.

Label & packaging

This record documents one specimen. It describes that specimen only, not every example of the model.

S1 · Box with hook, size 1/0

Size
1/0 (printed on the label)
Container
Box
Hook condition
Intact. Surface rust on the point, barb and bend; finish worn in patches along the shank (P).
Packaging condition
Fair — significant wear, partially legible
Measured
size 1/0
Photographs
IMG-1IMG-2
Detailed condition observations
Wear
box wrapper, upper-left edge: Wrapper torn and lifted, with exposed paper fibres, creasing and brown staining. LBL-10
Wear
box wrapper and label, lower-left edge: Several brown and rust-coloured stains, including spots immediately outside and beside the left label border. LBL-11
Wear
lid label, right side: Tan discoloration and mottled foxing-like spots around the right side of the printed title and size line. LBL-12
Wear
box wrapper, lower-right: Small rust-brown spot below the label, with additional light discoloration along the lower wrapper. LBL-13

The operator confirms that the photographed hook came from this box. The pencilled 1/0 marking is the hook's labelled size. The printed quantity of 100 does not establish how many hooks survive in the package.

Full label transcription
LBL-1 printed · lid label, top banner from IMG-1
HARRISON’S
LBL-2 printed · lid label, below banner, left from IMG-1
Made in Engla[?]d.
LBL-3 printed · lid label, below banner, right from IMG-1
2987
LBL-4 trademark · lid label, above fish illustration from IMG-1
TRADE          MARK.
LBL-5 trademark · lid label, below fish illustration from IMG-1
REG. U.S.          PAT. [?]FF.
LBL-6 printed · lid label, line above large title from IMG-1
CELEBRATED SPRING STEEL
LBL-7 printed · lid label, large title from IMG-1
SPROAT HOOKS.
LBL-8 printed · lid label, bottom line from IMG-1
No.          Ringed.          100
LBL-9 pencil · lid label, blank after No. from IMG-1
1/0
Trademark
Left-facing fish illustration centered on the label, with spotted flank, a large dorsal fin, a small second fin behind it and a forked tail.
As entered on the specimen record
HARRISON’S
Made in Engla[?]d.          2987
TRADE          MARK.
REG. U.S.          PAT. [?]FF.
CELEBRATED SPRING STEEL
SPROAT HOOKS.
No.          Ringed.          100
Layout
Ruled border with a horizontal rule under the banner. The made-in line is at left and the model number at right on the line below the banner. The fish illustration has a trade-mark legend above and another below, each split into a left and a right word group. The bottom line sets “No.”, “Ringed.” and “100” across the label, with a blank after “No.”.
Typeface
The title line SPROAT HOOKS. is set large and letterspaced.
Printed marks
The fish trademark is accompanied by TRADE and MARK. above the illustration, with REG. U.S. and PAT. [?]FF. below. The initial character of the final lower legend word is damaged.
Later marks
Faint pencil entry 1/0 in the blank after No. on the label's bottom line.

Condition

The hook is structurally intact, with brown corrosion concentrated around the point and barb. Smaller rust spots and coating losses occur on the bend and shank P.

Inferred Packaging · Packaging

The pencilled 1/0 entry suggests the printed label was designed to accommodate different hook sizes, with the size entered separately. The printed quantity of 100 appears to be part of the standard product-label layout.

How we got there

Basis: The bottom label line has printed No., Ringed. and 100 elements, with 1/0 entered faintly in pencil in the blank following No.

Reasoning: A preprinted blank for size is consistent with a reusable label format across product sizes. Separating the handwritten size from the permanent printed wording would allow the same layout to be applied to multiple boxed sizes.

History & dating

Series

The 1895 T. H. Chubb Rod Co. Retail Catalogue identifies Harrison’s hooks among its artificial-fly hook offerings. Its gut-mounted hook section illustrates SPRING STEEL SPROAT HOOKS, including size 1-0 V. These are related Harrison products; the listing does not identify model 2987 or its ringed construction.

A fishing-hook sample book in the Chesapeake Bay Maritime Museum collection, dated approximately 1920–1939 in its archival description, includes Harrison’s Spring Steel Carlisle hooks and a separately listed Sproat category V. The description does not identify the Sproat hooks as Harrison’s model 2987.

Working hypothesis Period · Packaging

Packaging

The Harrison 2987 box has the appearance of an early twentieth-century retail hook package. Its ruled typography, fish trademark and handwritten size entry are consistent with older printed-stock packaging practices.

How we got there

Basis: The box has a paper wrapper, bordered printed label, letterspaced product designation, fish trademark and pencilled 1/0 size. A dated 1895 catalog documents related Harrison spring-steel Sproat products.

Reasoning: The combination of printed manufacturer and product details with a hand-entered size fits a period retail packaging approach. The nineteenth-century catalog provides historical context for the product wording, while the physical presentation supplies the basis for a broad packaging-period estimate.

Working hypothesis Lineage · Model

Model 2987 may belong to a longer-running Harrison spring-steel Sproat product family. The shared product wording provides a plausible connection to Harrison Sproat hooks illustrated in the 1895 Chubb catalog.

How we got there

Basis: The model 2987 box prints CELEBRATED SPRING STEEL and SPROAT HOOKS. The dated Chubb catalog illustrates SPRING STEEL SPROAT HOOKS among related Harrison offerings.

Reasoning: The distinctive combination of manufacturer association, spring-steel wording and Sproat designation suggests continuity in product naming. The catalog's gut-mounted hooks and the ringed 2987 specimen could represent different configurations within that wider offering.

Value & buying

The original box preserves identifying information that a loose hook would not carry: the Harrison’s name, model number 2987, Sproat designation, ringed specification and fish trademark P. The pencilled size connects the surviving hook to its recorded 1/0 packaging P.

Keeping this hook with its labelled box preserves that identification and provenance. This record does not establish the scarcity of model 2987 or the extent of collector demand.

No recorded sold sales for Harrison model 2987 are included in this evidence record. A sold-based market value range is not established.

Estimate Value · Value scenario

Indicative collector value

USD 20.00–50.00 per lot

1 hook(s); Fair paper-wrapped box with one intact but corroded hook; Original Harrison 2987 labelled box. Estimated November 16, 2026. Our best estimate.

An indicative collector value for this Harrison 2987 size 1/0 hook with its fair-condition original labelled box is $20–$50. This estimate covers the box and one surviving hook as a single lot.

How we got there

Basis: The package bears a legible Harrison name, model number, Sproat designation, fish trademark and pencilled size. The hook is structurally intact but has corrosion at its point and barb. The wrapper has tears, stains and wear.

Reasoning: The estimate places the item in a modest two-digit vintage-hook collecting category, using editorial judgment rather than a claimed sale comparison. A specifically identified original box adds useful context to the hook, while corrosion and wrapper wear affect this particular lot. The printed quantity of 100 is not treated as surviving contents.

Inferred Collector interest · Specimen S1

This boxed example offers stronger identification and display context than an isolated loose hook. Its fish trademark, model number, printed Sproat designation and pencilled 1/0 size preserve a coherent manufacturer-and-specimen record.

How we got there

Basis: The original box and hook are paired as specimen S1. The package retains legible manufacturer information, a fish trademark, model number, pattern name and a handwritten size marking.

Reasoning: Collectors can identify the maker, stated product name and labelled size together, rather than depending on hook shape alone. The worn but legible package also contributes useful packaging evidence for future comparisons.

Sources & research

Sources & documentation

This specimen and its packaging — photographed, 2 images
Supports: FinishEyeBendWireHook type applicationQuantity per package
+7 morefewerCondition notesShank gap ratioIs snelledSummaryIdentificationTechnical notesCollectability detail

Open questions

  1. Does a Harrison catalog, trade list or advertisement give the production dates or intended use of model 2987?No catalog, price list or dated source for model 2987 is on record, so production dates and intended use are not stated.Can you help? Send a scan or photograph of the catalog page or advertisement, with the title and year if known.
  2. Do other surviving Harrison 2987 boxes document additional hook sizes or alternate label designs?The recorded specimen documents one pencilled size 1/0 label. No additional model 2987 package or size variation is documented in this evidence record.Can you help? Send photographs of another Harrison 2987 box, including its complete label, any size marking and the hook or hooks associated with it.

Entry updated November 16, 2026.