Hook Reference › O. Mustad & Son Hooks › Mustad 31250 — Limerick Hooks

O. Mustad & Son 31250

Limerick Hooks

Marks: P photographically · V verified · I inferred · E estimated · S speculative What they mean

Photographic record

2 photographs

Side profile of a dark bronze-toned single fishing hook on blue graph paper, showing a small downturned eye, curved bend, inward-pointing tip, and raised barb.
IMG-2Mustad — New entry — image 2 Loose hook photographed on a measurement grid, showing a small downturned eye, deep bend, and distinct barb (P). Its nominal size is not independently identifiable from the photograph.

Identify

Mustad 31250 is identified on its examined packaging as a fine-wire Limerick hook P. A loose hook photographed with the box shows the corresponding general form, although its original association with the marked size 4 package has not been independently confirmed I.

How to identify it

Look for “Qual. 31250” and “Mustad-Limerick Hooks” on the printed box label P. The examined example has a large black key emblem beneath the word “Key,” a decorative border, and the manufacturer identification “O. MUSTAD & SÖN” P.

The handwritten 4 follows the printed “No.” and identifies the package’s marked size P. When examining loose hooks, compare their eye, bend, point, and proportions with a documented specimen; similar outlines alone do not prove a model or size assignment I.

Working hypothesis Identification · Specimen S1

The loose hook may be an original size 4 example associated with the photographed Mustad 31250 box (S). Its visible outline and eye are consistent with the label description, but these similarities do not independently establish provenance or nominal size.

How we got there

Basis: The box is marked size 4 and specifies a small tapered eye, Limerick bend, and fine wire. The loose hook has a corresponding general appearance and is photographed both with the box and separately on a grid.

Reasoning: Close physical correspondence and deliberate photographic association provide a plausible identification lead. They are weaker than original packaging provenance, a documented specimen history, or an independent model-specific dimensional comparison.

Measurements & specifications

Features of the model, as recorded
FeatureRecordedEvidence
EyeTapered Eye, Turned Down
Show noteHide note

The small terminal eye turns downward P. The box specifies "T'd. small tapered eye" P. Its opening is not fully resolved in side view.

OBS-1LBL-5
WireFine (1X Fine), Round
ShankStandard — Plain
BendLimerick, Standard gap
Show noteHide note

The box identifies a Mustad-Limerick bend P. The photographed specimen has a deep, smooth curve and a predominantly straight shank P. Lateral offset is unverified.

OBS-2LBL-5
PointSuperior
Show noteHide note

A distinct triangular barb projects from the inner side of the point section behind its tip P.

OBS-4
FinishBronzed — stated on packaging
Show noteHide note

The hook appears dark bronze-toned P. The label states "Rustproof" but does not identify the exact coating or confirm a bronzed finish P.

OBS-6LBL-5

The package specifies “Superior,” “T’d. small tapered eye,” and “Rustproof Fine wire” P. Superior identifies Mustad’s point style, distinguished by its comparatively straight inner taper; it is not a product-quality grade. The photographed point has a similar near-straight inner taper P.

The specimen has a predominantly straight, unadorned shank and a distinctly barbed point P. The available evidence does not establish a manufacturer-designated shank-length grade, gap grade, numerical wire diameter, or lateral point offset.

Measurements

Overall length28 mm IcaliperMEA-1
Shank length22.7 mm IcaliperMEA-2
Gap width8.9 mm IcaliperMEA-3
Wire diameter0.9 mm IcaliperMEA-4

Size 4, specimen S1. Bend depth, weight and the shank-to-gap ratio are in the full table.

All recorded values
Per size, with how each dimension was taken
SizeOverall lengthShank lengthGap widthBend depthWire diameterWeight
4Specimen S128 mm IcaliperMEA-122.7 mm IcaliperMEA-28.9 mm IcaliperMEA-3—0.9 mm IcaliperMEA-4—
Calibrated SVG True-scale preview

How the measurements are defined
How hook dimensions are measuredA hook outline with dimension lines for overall length, shank length, gap, bend depth, and wire diameter.Overall lengthShank lengthGapBend depthWire diameter
Overall length
Eye to the farthest point of the bend.
Shank length
Eye to the start of the bend.
Gap
Point to shank, at right angles to the shank.
Bend depth
Shank to the bottom of the bend.
Wire diameter
Across the wire, measured by caliper where possible.

Inferred Design · Model

The combination of fine wire, a compact downturned eye, a Superior point, and a pronounced barb suggests a design balancing tying access with retention at the point (I). The actual strength and penetration characteristics cannot be established from the photographs.

How we got there

Basis: The label states Superior, T'd. small tapered eye, and Fine wire. The side photograph shows a deep bend, relatively straight point taper, and distinct triangular barb.

Reasoning: A small eye may leave room for a compact dressing, and a pronounced barb can mechanically resist backward movement after penetration. Fine wire affects the amount of material in the hook and may influence strength, but performance depends on dimensions, metallurgy, and temper.

Use & alternatives

  • Nymph

Primary application

Mustad-Limerick 31250 was recommended for nymph tying in a May 27, 2010 article published by Singlebarbed V. The author specifically identified the model and discussed its shape in relation to Mustad 3906B. This documents a practical fly-tying application without establishing an exclusive intended use or manufacturer-designated application.

Inferred Application · Model

The 31250 appears suitable for traditionally dressed nymphs and potentially other wet-fly dressings where a fine-wire, barbed Limerick hook is desired (I). Its small tapered eye may be useful where a compact head is preferred.

How we got there

Basis: The packaging specifies fine wire and a small tapered eye. The photographed hook has a barbed point and Limerick form. A 2010 fly-tying article independently recommends the exact model for nymph tying.

Reasoning: The combination of a relatively unobtrusive eye and fine wire offers plausible tying advantages for some dressed patterns. The documented nymph recommendation supports that use, while extending the application to other wet flies remains a functional inference.

Modern equivalents

Inferred Comparison · Model

Mustad 3906B is a useful starting point for a visual comparison because a published fly tyer specifically compared its outline with the 31250 (V). The comparison should focus on bend shape, eye form, wire, and actual dimensions rather than assuming the two models are interchangeable (I).

How we got there

Basis: The opened 2010 article compares model 31250 to Mustad 3906B while distinguishing its Limerick bend. The examined package specifies fine wire and a small tapered eye.

Reasoning: A model named in a firsthand comparison provides a concrete reference for evaluating differences. However, a similar outline does not establish equal shank grade, gap, size conversion, or intended application.

Label & packaging

This record documents one specimen. It describes that specimen only, not every example of the model.

S1 · Marked size 4 Key box and associated loose hook

Size
4 (from the existing record)
Container
Box
Hook condition
The photographed hook appears intact, retaining its small downturned eye, curved bend, point, and prominent barb (P). Minor surface marks are visible, but no obvious breakage or major deformation is apparent.
Packaging condition
Good — moderate wear, legible
Measured
size 4
Photographs
IMG-1IMG-2
Detailed condition observations
Wear
lid label, upper edge and upper right: Several thin vertical scratches or creases interrupt the green surface. The right edge has a small torn or lifted section. LBL-9
Wear
lid label, center and lower edge: Uneven discoloration, surface abrasions, wrinkles, and a horizontal crease or joint are visible. Some printed areas are partly obscured by the hook. LBL-10
Wear
box lid, corners and outer edges: The off-white cardboard shows yellowing, stains, corner wear, surface scuffing, and fraying or separation along portions of the edges. LBL-11
Wear
lid label, lower center near T'd.: A short diagonal brownish stroke or surface mark crosses the printed abbreviation. Its medium and origin cannot be established from the photograph. LBL-12

One loose hook is placed across the lid in IMG-1 and one loose hook is photographed in side profile in IMG-2. Their appearance is consistent with a shared specimen, but that identity and original box membership have not been independently established. The marked size 4 belongs to the package; the loose hook's nominal size remains an assignment based on the stored record. The box interior and surviving quantity are not shown.

Full label transcription
LBL-1 printed · lid label, upper left from IMG-1
Key
LBL-2 printed · lid label, upper center from IMG-1
O. MUSTAD & SÖN
MANUFACTURERS
OSLO - NORWAY
LBL-3 printed · lid label, left beneath key emblem from IMG-1
Bran[?]
LBL-4 printed · lid label, upper center below manufacturer address from IMG-1
Qual. 31250
LBL-5 printed · lid label, central product description from IMG-1
Superior
Mustad-Limerick Hooks
T'd. small tapered eye
Rustproof Fine wire
LBL-6 printed · lid label, lower left from IMG-1
100
No.
LBL-7 printed · lid label, lower right from IMG-1
Made in Norway
LBL-8 handwritten · lid label, immediately following printed No. from IMG-1
4
Trademark
A large upright black key beneath the printed word Key forms the main emblem. The label also has a decorative floral or star-like border. The partly obscured word beneath the emblem reads Bran[?]. Trademark registration status is not established.
As entered on the specimen record
Key
O. MUSTAD & SÖN
MANUFACTURERS
OSLO - NORWAY
Bran[?]
Qual. 31250
Superior
Mustad-Limerick Hooks
T'd. small tapered eye
Rustproof Fine wire
100
No.
Made in Norway
Layout
Rectangular green printed label on an off-white cardboard box lid, bordered by repeated black floral or star-like ornaments. The key emblem occupies the upper-left portion, the manufacturer heading is centered above the product description, and quantity and size markings appear toward the lower left. The hook obscures portions of the printed wording.
Typeface
The manufacturer name and main product description use prominent dark bold lettering. Smaller specification lines and the lower Made in Norway wording use contrasting lettering styles.
Printed marks
Qual. 31250
Superior
100
No.
Made in Norway
Later marks
4, handwritten after printed No.

Care of this specimen: Keep the box and hook separately protected against abrasion and moisture. Retain their documented association without asserting that the hook is an original surviving box content. Avoid attaching labels directly to the hook or the printed box surface.

Condition

The photographed hook appears intact, retaining its eye, bend, point, and barb P. Minor surface marks are visible. The photographs cannot conclusively establish corrosion or coating integrity.

Inferred Packaging · Packaging

The green Key-marked box can serve as a reference for identifying the same packaging presentation on other Mustad hook boxes (I). Its printed quantity, handwritten size, and exact model wording should be recorded independently when comparing examples.

How we got there

Basis: The photographed box has a distinctive key emblem, ornamental border, manufacturer heading, model number, printed nominal quantity of 100, and handwritten size 4.

Reasoning: Comparing all printed and handwritten elements separately helps distinguish a recurring packaging design from a particular model and size assignment. Preserving that distinction also avoids assuming that an old box still holds its printed quantity.

History & dating

Dating

A May 27, 2010 Singlebarbed article explicitly identifies Mustad-Limerick model 31250 V. This establishes a dated published reference, not the beginning or end of manufacture. The photographed packaging has no independently established date.

O. Mustad & Son — The photographed label identifies O. MUSTAD & SÖN, lists OSLO - NORWAY, and states Made in Norway P. It does not identify an individual manufacturing facility or production year. Read the maker’s history →

Working hypothesis Period · Packaging

Packaging

The green Key-marked box may represent a packaging design that preceded the 2010 published reference to model 31250 (S). Its ornamental design and printing are potentially useful for comparison with dated Mustad packages, but do not independently establish an era.

How we got there

Basis: The photographed label has a prominent key emblem, ornamental border, manufacturer wording, and model-specific specifications. A separate article documents model 31250 in 2010.

Reasoning: Packaging designs can sometimes be dated through documented examples, but stylistic appearance alone cannot supply a reliable production range. The published article establishes model recognition rather than the age of this particular box.

Working hypothesis Lineage · Model

The 31250 and 3906B may reflect alternative hook designs available to fly tyers seeking broadly similar profiles but different bends (S). The published comparison does not establish a shared design lineage, chronological succession, or formal product-family relationship.

How we got there

Basis: A dated article compares the models' outlines and specifically distinguishes the 31250's Limerick bend.

Reasoning: The direct model comparison suggests an avenue for studying Mustad's overlapping hook shapes, but a documented lineage would require manufacturer statements or catalogue evidence connecting them.

Value & buying

Basis: The checked evidence establishes the model's identification and a dated published reference but does not establish market frequency, surviving quantities, or collector demand. No rarity classification or numerical collectability rating can be supported.

The examined example provides a clearly identified model number, descriptive factory label, handwritten size marking, and a photographed loose hook P. These details make it possible to compare an offered example against a documented package and physical specimen.

The box shows wear but retains legible identifying text. Its original contents and the loose hook’s original association with the package remain unverified I. This record does not establish scarcity or demand for model 31250, so a numerical collectability rating is not assigned.

No recorded sold sales are included in the checked evidence. A transaction-derived market value range is not established. Any indicative estimate is provisional and separate from verified sales data.

Where to find

When evaluating an offered example, request photographs of the model number, size marking, box interior, and individual hooks. Check the actual contents rather than assuming the printed quantity of 100 remains present.

Inferred Collector interest · Model

The 31250 offers practical collecting interest as a clearly labeled example of Mustad's Limerick-hook terminology and Superior point designation (I). Its packaging also provides a useful reference for distinguishing printed specifications from later handwritten size marks.

How we got there

Basis: The examined label explicitly identifies the model, Limerick bend, Superior point, tapered eye, fine wire, and nominal package quantity.

Reasoning: The combination of a readable model number and original specification language is useful for identifying loose examples and checking terminology in a hook reference collection. This interest is documentary rather than a claim of exceptional rarity.

Sources & research

Sources & documentation

This specimen and its packaging — photographed, 2 images
Supports: Country of originSize documentedQuantity per packageMeasurements availableOverall lengthShank length
+18 morefewerGap widthWire diameter measuredMeasurement notesEyeBendBarbFinishCondition notesDating rangePackaging format codePackagingIs snelledWhere to findManufacturer period contextSummaryIdentificationTechnical notesCollectability detail

Open questions

  1. What are the earliest and latest documented Mustad catalogue listings for model 31250?The examined box confirms the model identification, and a published article documents the number in 2010, but no dated manufacturer catalogue establishes its production span.Can you help? Share scans or photographs of original Mustad catalogues or price lists showing model 31250, with publication year, page number, and complete specifications.

Entry updated November 14, 2026.